ML9213GA中文资料冲电线数据手册PDF规格书

GENERAL DESCRIPTION

The ML9213 is a full CMOS controller/driver for Duplex or Triplex (1/2 duty or 1/3 duty) vacuum fluorescent display tube. It consists of a 56-segment driver multiplexed to drive up to 168 segments, and 10-bit digital dimming circuit.

FEATURES

• Logic supply voltage (VDD) : 5.0 V 10

• Driver supply voltage (VDISP) : 8.0 to 18.0 V

• Duplex/Triplex (1/2 duty / 1/3 duty) selectable

DUP/TRI = 1/2 duty selectable at “H” level

DUP/TRI = 1/3 duty selectable at “L” level

• Number of display segments

112 segments max. (during 1/2 duty mode)

168 segments max. (during 1/3 duty mode)

• Master/Slave selectable

M/S = “H” level : Master mode

M/S = “L” level : Slave mode

• Interface with a microcontroller

Three lines: CS, CLOCK, and DATA IN

• 56-segment driver outputs : IOH = –5.0 mA at VOH = VDISP–0.8 V (SEG1 to 37)

(can be directly connected to VFD tube : IOH = –10.0 mA at VOH = VDISP–0.8 V (SEG38 to 56)

and requires no external resistors) : IOL = 500 μA at VOL = 2.0 V (SEG1 to 56)

• 3-grid pre-driver outputs : IOH = –5.0 mA at VOH = VDISP–0.8 V

(requires external drivers) IOL = 10.0 mA at VOL = 2.0 V

• Logic outputs : IOH = –200 μA at VOH = VDD–0.8 V

IOL = 200 μA at VOL = 0.8 V

• Built-in anode digital dimming circuit (10-bit resolution)

• Built-in oscillation circuit (external resistor and capacitor)

• Built-in Power-On-Reset circuit

• Package options:

80-pin plastic QFP (QFP80-P-1420-0.80-BK) Product name: ML9213GA

80-pin plastic QFP (QFP80-P-1414-0.65-K) Product name: ML9213GP