MCP6N16

Rail-to-Rail Input and Output

Description: MicrochipTechnologyInc.offersthesingleZero-DriftMCP6N16instrumentationamplifier(INA)withEnablepin(EN)andthreeminimumgainoptions(GMIN).TheinternaloffsetcorrectiongiveshighDCprecision:ithasverylowoffsetandoffsetdrift,andnegligible1/fnoise. Featu

MCP6N16

Zero-Drift Instrumentation Amplifier; Vos: ± 17 µV (Gmin = 100)\nLow Offset Drift: ± 60 nV/ºC\nCMRR: 112 dB minimum\nPSRR: 110 dB minimum\nLow Gain Error: ±0.15% maximum\nMinimum Gain (Gmin) Options: 1, 10 and 100 V/V\nRail-to-Rail Input and Output\nGain Set by Two External Resistors\nBandwidth: 500 kHz (typical)\nVdd: 1.8V to 5.5V\nIq: 1.1 mA (typical)\nPower Saving (Enable) Pin: EN\nElectromagnetic Interference Rejection Ratio (EMIRR): 111 dB at 2.4 GHz\nExtended Temperature Range: -40ºC to +125ºC;

The MCP6N16 is a zero-drift instrumentation amplifier designed for single-supply operation with rail-to-rail input (no common mode crossover distortion) and output performance. The supply voltage range is low enough to support many portable applications. All devices are fully specified from -40ºC to +125ºC. Each device has EMI filters at the input pins, providing superior EMI rejection. This family has three minimum gain options (1, 10 and 100 V/V) in order to allow the user to optimize the input offset voltage and input noise for different applications.

SSM6N16FE

HighSpeedSwitchingApplicationsAnalogSwitchingApplications

SSM6N16FE

HighSpeedSwitchingApplications

SSM6N16FU

HighSpeedSwitchingApplications