2.5V to 6.0V Micropower CMOS Op Amp

Description The MCP606/7/8/9 family of operational amplifiers (op amps) from Microchip Technology Inc. are unity-gain stable with low offset voltage (250 µV, max.). Performance characteristics include rail-to-rail output swing capability and low input bias current (80 pA at +85°C, max.). These fe

文件：480.49 Kbytes 页数：32 Pages

Microchip

微芯科技

2.5V to 6.0V Micropower CMOS Op Amp

文件：480.54 Kbytes 页数：32 Pages

Microchip

微芯科技

2.5V to 6.0V Micropower CMOS Op Amp

文件：720.83 Kbytes 页数：42 Pages

Microchip

微芯科技

2.5V to 6.0V Micropower CMOS Op Amp

The MCP607 dual operational amplifier (op amp) has a gain bandwidth product of 155 kHz with a low typical operating current of 18.7 uA and an offset voltage that is less than 250 µV. The MCP607 uses Microchip's advanced CMOS technology, which provides low bias current, high-speed operation, high ope Low Input Offset Voltage: 250 µV (max.) \nRail-to-Rail Output\nLow Input Bias Current: 1 pA (typ.) \nLow Quiescent Current: 25 µA (max.) \nPower Supply Voltage: 2.5V to 6.0V\nUnity-Gain Stable\nIndustrial Temperature Range: -40°C to +85°C\nAEC-Q100 Grade 1;

Microchip

微芯科技

110 關A, High Precision Op Amps

Description The Microchip Technology Inc. MCP6071/2/4 family of operational amplifiers (op amps) has low input offset voltage (±150 µV, maximum) and rail-to-rail input and output operation. This family is unity gain stable and has a gain bandwidth product of 1.2 MHz (typical). These devices

文件：699.74 Kbytes 页数：34 Pages

Microchip

微芯科技

110 μA, High Precision Op Amps

Description The Microchip Technology Inc. MCP6071/2/4 family of operational amplifiers (op amps) has low input offset voltage (150 μV, maximum) and rail-to-rail input and output operation. This family is unity gain stable and has a gain bandwidth product of 1.2 MHz (typical). These devices o

文件：856.16 Kbytes 页数：42 Pages

Microchip

微芯科技

110 μA, High Precision Op Amps

Description The Microchip Technology Inc. MCP6071/2/4 family of operational amplifiers (op amps) has low input offset voltage (150 μV, maximum) and rail-to-rail input and output operation. This family is unity gain stable and has a gain bandwidth product of 1.2 MHz (typical). These devices o

文件：856.16 Kbytes 页数：42 Pages

Microchip

微芯科技

10 MHz Precision Op Amps

Description The MCP60711/1U/3 op amps operate on a power supply voltage between 2.2V and 5.5V, and over the ETemp temperature range (-40°C to +125°C). The input offset voltage is trimmed at 25°C and VDD = 3.5V. Single op amps are offered in 5L SC70, 5L SOT-23, and 6L SOT-23 (with SHDN pin) p

文件：1.28791 Mbytes 页数：41 Pages

Microchip

微芯科技

10 MHz Precision Op Amps

Description The MCP60711/1U/3 op amps operate on a power supply voltage between 2.2V and 5.5V, and over the ETemp temperature range (-40°C to +125°C). The input offset voltage is trimmed at 25°C and VDD = 3.5V. Single op amps are offered in 5L SC70, 5L SOT-23, and 6L SOT-23 (with SHDN pin) p

文件：1.28791 Mbytes 页数：41 Pages

Microchip

微芯科技

10 MHz Precision Op Amps

Description The MCP60711/1U/3 op amps operate on a power supply voltage between 2.2V and 5.5V, and over the ETemp temperature range (-40°C to +125°C). The input offset voltage is trimmed at 25°C and VDD = 3.5V. Single op amps are offered in 5L SC70, 5L SOT-23, and 6L SOT-23 (with SHDN pin) p

文件：1.28791 Mbytes 页数：41 Pages

Microchip

微芯科技