MCF8316DVQRGFRQ1中文资料德州仪器数据手册PDF规格书

1 Features

• AEC-Q100 qualified for automotive applications

– Temperature Grade-1 : –40°C ≤ TA ≤ 125°C

• Three-phase BLDC motor driver with integrated

sensorless motor control algorithm

– Code-free Field Oriented Control (FOC)

– Speed, current, power, or voltage control

– Forward and reverse windmilling support

– Configurable power and speed limit

– Lead angle adjustment for high efficiency

– Improved acoustic performance with soft-start,

soft-stop and dead time compensation

– Offline motor parameter measurement (MPET)

– Analog, PWM, frequency, or I2C speed input

– Configurable motor start-up and stop options

– Flux weakening for high-speed operation

– Anti-voltage surge (AVS) protection

• 4.5 to 35V operating voltage (40V abs max)

• High output current capability: 8A peak

• Low MOSFET on-state resistance

– RDS(ON) (HS + LS) at TA = 25°C : 95mΩ (typ.)

• Low power sleep mode: Refer Table 6-8

– 5μA (maximum) at VVM = 24V, TA = 25°C

• Speed loop accuracy: 3% with internal clock and

1% with external clock reference

• Configurable EEPROM with R/W security to store

device configuration

• Built-in current sensing

• Built-in 3.3V/5V, 170mA buck regulator

• Built-in 3.3V, 20mA LDO regulator

• Dedicated DRVOFF pin to disable (Hi-Z) outputs

• Spread spectrum, PWM dithering, and slew rate

for EMI reduction

• Suite of integrated protection features

– Supply under voltage lockout (UVLO)

– Supply over voltage protection (OVP)

– Motor lock detection

– Configurable current limit

– Thermal warning and shutdown (OTW/TSD)

– Fault condition indication pin (nFAULT)

– Optional fault diagnostics over I2C interface

2 Applications

• Brushless-DC (BLDC) Motor Modules

• Automotive Seat Cooling Fans

• Automotive Thermal Management Pumps and

Blowers

3 Description

The MCF8316D-Q1 provides a single-chip, codefree

sensorless FOC device for driving 12 to 24V

brushless-DC motors (BLDC) or Permanent Magnet

Synchronous motor (PMSM) up to 8A peak current.

The MCF8316D-Q1 integrates three ½-bridges with

40V absolute maximum capability and a very low

RDS(ON) of 95mΩ (HS+LS FETs). MCF8316D-Q1

integrates a buck regulator (3.3V/5V, 170mA) and

LDO (3.3V, 20mA) that can be used to power external

circuits.

The FOC algorithm configuration can be stored

in non-volatile EEPROM, which allows the device

to operate stand-alone once the device has been

configured. The device receives a speed command

through a PWM input, analog voltage, variable

frequency square wave or I2C command. There are a

large number of protection features integrated into the

MCF8316D-Q1, intended to protect the device, motor,

and system against fault events.