Features

• Integrated USB Type-C lane switch to

support

− Flip-ability of USB Type-C

− USB 3.2 x1 Gen1 / Gen2 retiming

• Power Supply Voltages

− 1.8 V for I/O, 1.2 V for core

• USB3.2 Appendix.E x1 Compliant Retimer

− 5 Gbps and 10 Gbps support

− Link training participation

− Spread-spectrum clocking as per USB 3.2

standard

− LFPS polling and processing

− LFPS Based PWM support

− Pass-Through / Local loopback

− Loopback BERT for USB 3.2 SS

− Lane polarity inversion

− BLR (Bit-Level Retimer) for SS mode

o Low latency data path

o Link layer snooping

▪ 8b/10b coding

▪ De-scrambler

▪ Link power management

support

− SRIS (Separate Reference clock

Independent SSC) for SSP mode

o 128b/132b coding

o Scrambler / De-scrambler

o Link power management support

o SKP OS handling / Elastic buffer

for USB for clock offset

compensation

o DC balance tracking / control

o Error correction

− Transmitter Emphasis

o 3-tap FIR TXEQ for SSP

o 2-tap TXEQ for SS

− Adaptive Receiver Equalization

o DFE + CTLE for SSP to support

-23dB insertion loss

compensation @5GHz

o CTLE for SS to support -20dB

insertion loss compensation

@2.5GHz

− Support of custom PHY configuration

through TWI (Two Wire Interface)

• TWI slave to configure the integrated lane

mapping and operation mode

− Compatible with I2C master

− Support up to 4 unique TWI device ID

• Configuration pins for the integrated lane

switch and operation mode

• Low Power Operation

− 270mW in USB 3.2 x1 Gen2 mode with

1.2 V and 1.8 V power supply

− 180mW in USB 3.2 x1 Gen1 mode with

1.2 V and 1.8 V power supply

− 850 uW in low power state

• ESD Specification

− 2kV HBM, ±500V CDM

• Package

− 46 Ex-VQFN (6.5 mm x 4.5 mm)

Applications

• Desktop PC / Notebook / Tablet /

Smartphone motherboard enabling USB

Type-C

• USB device to drive longer USB Type-C

cable

1. Description

The MCDP6200 is a low power USB 3.2 x1 retimer with an integrated USB Type-C switch targeted for

desktop / mobile PC motherboard-down and USB Type-C device application.

The USB 3.2 x1 retimer supports both SuperSpeed (SS) bit rate (5 Gbps), and SuperSpeedPlus (SSP) data

rate (10 Gbps). The USB 3.2 x1 retimer includes the link layer function and LTSSM and RTSSM to

participate in the link training. The MCDP6200 supports SS mode with a BLR (Bit-Level Retimer) and SSP

mode with a SRIS (Separate Reference clock Independent SSC). The MCDP6200 supports link power

management with Ux entry and exits in both SS and SSP modes. In addition, the MCDP6200 supports the

link state and link quality maintenance, compensates the clock offset between the downstream port and the

upstream port, detects errors, and corrects single symbol errors in framing order sets, single bit block header

errors, and single or double-bit SKP symbol errors in SSP mode. It also supports spread spectrum clocking

(SSC) to minimize EMI and the low frequency periodic signaling (LFPS). The transmitter employs 3-tap FIRbased

transmitter equalizer for SSP operation and fixed transmitter equalizer ranging from 3 dB to 4 dB for

SS operation. The receiver employs an adaptive Continuous Time Linear Equalizer (CTLE) and a Decision

Feedback Equalizer (DFE). Both the transmitter equalizer and the receiver equalizer are configurable

through the TWI register. Proper settings to comply with USB 3.2 electrical requirements are provided by

default.

The MCDP6200 operating mode can be configured through the DIS_N and P_POL pins. It can be optionally

configured through TWI by enabling the feature through TWI. These interfaces can be controlled from an

external Power Delivery (PD) controller or microcontroller to set the plug orientation and the pin mapping of

the USB Type-C. The MCDP6200 operates at 1.8 V and 1.2 V.

The power consumption is:

280 mW in Gen2 operation and 190 mW in Gen1 operation.

850 μW in stand-by state

The MCDP6200 is offered in a 46-pin, 6.5 mm x 4.5 mm Ex-VQFN package.

MCDP6200属于集成电路（IC） > 专用。芯凯电子科技（上海）有限公司制造生产的MCDP6200专用该系列产品可提供所需的功能，用以将信息源/信宿连到各种复杂或范围狭窄应用中的传感器、变送器、致动器、传输介质或其他此类端点。例如，汽车安全气囊驱动器、车身控制和信息娱乐总线、自适应电缆均衡器、智能卡等等。