MC74VHCT126AD集成电路（IC）的缓冲器驱动器接收器收发器规格书PDF中文资料

MC74VHCT126AD属于集成电路（IC）的缓冲器驱动器接收器收发器。由安森美半导体公司制造生产的MC74VHCT126AD缓冲器，驱动器，接收器，收发器逻辑缓冲器、驱动器、接收器和收发器允许隔离对某个电路的逻辑信号的访问，以用于另一电路。缓冲器将其输入信号（不变或反相）传递到其输出，并可能用于清除弱信号或驱动负载。在布尔逻辑仿真器中，缓冲器主要用于增加传播延迟。逻辑接收器和收发器允许在数据总线之间进行隔离通信。

Quad Bus Buffer with 3–State Control Inputs

The MC74VHCT126A is a high speed CMOS quad bus buffer fabricated with silicon gate CMOS technology. It achieves noninverting high speed operation similar to equivalent Bipolar Schottky TTL while maintaining CMOS low power dissipation. The MC74VHCT126A requires the 3–state control input (OE) to be set Low to place the output into high impedance.

The VHCT inputs are compatible with TTL levels. This device can be used as a level converter for interfacing 3.3V to 5.0V, because it has full 5V CMOS level output swings.

The VHCT126A input structures provide protection when voltages between 0V and 5.5V are applied, regardless of the supply voltage. The output structures also provide protection when VCC = 0V. These input and output structures help prevent device destruction caused by supply voltage – input/output voltage mismatch, battery backup, hot insertion, etc.

The internal circuit is composed of three stages, including a buffer output which provides high noise immunity and stable output. The inputs tolerate voltages up to 7V, allowing the interface of 5V systems to 3V systems.

• High Speed: tPD = 3.8ns (Typ) at VCC = 5V

• Low Power Dissipation: ICC = 4µA (Max) at TA = 25°C

• TTL–Compatible Inputs: VIL = 0.8V; VIH = 2.0V

• Power Down Protection Provided on Inputs

• Balanced Propagation Delays

• Designed for 2V to 5.5V Operating Range

• Low Noise: VOLP = 0.8V (Max)

• Pin and Function Compatible with Other Standard Logic Families

• Latchup Performance Exceeds 300mA

• ESD Performance: HBM > 2000V; Machine Model > 200V

• Chip Complexity: 72 FETs or 18 Equivalent Gates