Features

• This family of digital signal controllers (DSCs) is

based on the 32-bit 56800EF core. On a single chip,

each device combines the processing power of a DSP

and the functionality of an MCU, with a flexible set of

peripherals to support many target applications:

– Industrial control

– Motion control

– Home appliances

– General-purpose inverters

– Smart sensors, fire and security systems

– Switched-mode power supply and power

management

– Uninterruptible power supplies (UPS)

– Solar inverter

– Medical monitoring applications

• DSC based on 32-bit 56800EF core

– Up to 100 MIPS at 100 MHz core frequency

– DSP and MCU functionality in a unified, C-efficient

architecture

– Enhanced single-precision Floating Point math Unit

(eFPU)

– COordinate Rotation DIgital Compute (CORDIC)

engine

• On-chip memory

– Up to 64 KB flash memory

– 8 KB data/program RAM

– Both on-chip flash memory and RAM can be

mapped into both program and data memory spaces

• Analog

– Two high-speed, 12-bit ADCs with dynamic x1, x2,

and x4 programmable amplifier

– Up to two operational amplifiers, programmable

gain up to x16

– Three analog comparators with integrated 8-bit DAC

references

– On-chip temperature sensors

• One high-resolution eFlexPWM module, with up to 12

PWM outputs, including up to 8 channels with 312ps

resolution NanoEdge placement

• Communication interfaces

– Up to two high-speed queued SCI (QSCI) modules

with LIN slave functionality

– One queued SPI (QSPI) module

– One LPI2C module (supports Full PMBus)

• Timers

– One 16-bit quad timer (1 x 4Ch)

– Up to three 32-bit Periodic Interval Timers (PITs)

– One enhanced Quadrature Decoder (eQDC)

• Security and integrity

– Cyclic Redundancy Check (CRC) generator

– Windowed Computer operating properly (COP)

watchdog

– External Watchdog Monitor (EWM)

• Clocks

– On-chip oscillators: 200 kHz, and 8/2MHz IRC

– Crystal / resonator oscillator

• System

– 4-channel enhanced DMA controller, supporting up

to 63 request sources

– Integrated power-on reset (POR) and low-voltage

interrupt (LVI) and brown-out reset module

– Inter-Module Crossbar and Event Generator

– JTAG/enhanced on-chip emulation (EOnCE) for

unobtrusive, real-time debugging

• Operating characteristics

– Single supply: 2.7 V to 3.6 V

– Operation ambient temperature (V grade

temperature): -40℃ to 105℃

– Operation ambient temperature (M grade

temperature): -40℃ to 125℃

• 64-pin LQFP, 48-pin LQFP packages (32-pin LQFP

and QFN optional)