MC33926PNB数据手册恩XP中文资料规格书

描述 Description

The 33926 is a monolithic H-Bridge Power IC designed primarily for automotive electronic throttle control but is applicable to any low-voltage DC servo motor control application within the current and voltage limits stated in this specification.
The 33926 is able to control inductive loads with currents up to 5.0 A peak. RMS current capability is subject to the degree of heatsinking provided to the device package. Internal peak-current limiting (regulation) is activated at load currents above 6.5 A ± 1.5 A. Output loads can be pulse width modulated (PWM-ed) at frequencies up to 20 kHz. A load current feedback feature provides a proportional (0.24% of the load current) current output suitable for monitoring by a microcontroller's A/D input. A Status Flag output reports undervoltage, overcurrent, and overtemperature fault conditions.
Two independent inputs provide polarity control of two half-bridge totem-pole outputs. Two independent disable inputs are provided to force the H-Bridge outputs to tri-state (high impedance off-state). An inverting input changes the IN1 and IN2 inputs to LOW = true logic.
The MC33926 is a SafeAssure® functional safety solution

特性 Features

• 8.0 V to 28 V Continuous Operation (Transient Operation from 5.0 V to 40 V)
• 225 mOhm maximum RDS(ON) @ 150°C (each H-Bridge MOSFET)
• 3.0 V and 5.0 V TTL / CMOS Logic Compatible Inputs
• Overcurrent Limiting (Regulation) via Internal Constant-Off-Time PWM
• Output Short Circuit Protection (Short to VPWR or Ground)
• Temperature-Dependant Current-Limit Threshold Reduction
• All Inputs have an Internal Source/Sink to Define the Default (Floating Input) States Sleep Mode with Current Draw < 50 µA (with Inputs Floating or Set to Match Default Logic States)
• This product is included in NXP®'s product longevity program, with assured supply for a minimum of 15 years after launch

应用 Application

Automotive
•Active Suspension