MB90F474L中文资料富士通数据手册PDF规格书

■ DESCRIPTIONS

The FUJITSU MB90470 Series is a 16-bit general-purpose microcontroller designed for consumer products and other process control applications requiring high-speed and real-time processing.

The F2MC-16LX CPU core instruction set retains the AT architecture of the F2MC*1 family, with additional instructions for use with high-level languages, expanded addressing mode, enhanced multiply and divide instructions, and full bit processing. Also included is a built-in 32-bit accumulator for long-word processing.

Peripheral resources built into the MB90470 series include 8/16-bit PPG, expanded I/O serial interface, UART, 10-bit A/D converter, 16-bit input-output timer, 8/16-bit up-counter, PWC timer, I2C*2 interface, DTP/external interrupt, chip select, and 16-bit reload timer.

■ FEATURES

• Clocks

Minimum instruction execution time :

50.0 ns at 5 MHz base oscillation with 4 × multiplier (internal operation at 20 MHz/3.3 V ± 0.3 V)

62.5 ns at 4 MHz base oscillation with 4 × multiplier (internal operation at 16 MHz/3.0 V ± 0.3 V)

Uses PLL clock multiplier.

• Maximum memory size

16 Mbytes

• Instruction set optimized for control applications

Handles bit, byte, word, long-word data

23 standard addressing modes

32-bit accumulator for enhanced high-precision calculation

Signed multiply-divide and expanded RETI instructions

• Instruction system compatible with high-level language (C) multitasking

System stack pointer

Instruction set correlation and barrel shift instructions

• Non-multi bus or multi-bus compatible

• Program patch function (for two address pointers)

• Improved execution speed

4-byte queue

• Powerful interrupt functions

8 external interrupt functions with 8-level programmable priority

• Data transfer functions (µDMA or Extended intelligent I/O service)

16 channels maximum

µDMA maximum assured operation frequency : 16 MHz

Extended intelligent I/O service maximum assured operation frequency : 20 MHz

• Built-in ROM

Flash versions : 256 KB, Mask ROM versions : 128 KB/256 KB

• Built-in RAM

10 KB/16 KB

• General purpose ports

84 ports maximum

(includes 16 ports with input pull-up resistance setting, 14 ports with output open drain setting)

• A/D converter

RC sequential comparator type, 8 channels

10-bit resolution, conversion time 4.65 µs (at 20 MHz operation)

• I2C interface

1 channel

• µPG

1 channel

• UART

1 channel

• I/O expansion serial interface (SIO)

2 channels

• 8/16-bit up/down timer

1 channel

• 16-bit PWC

3 channels (including 2-channel input comparison function)

• 16-bit reload timer

1 channel (8-bit × 2-channel, 16-bit × 1-channel mode switching function provided)

• 16-bit input-output timer

2-channel input capture, 6-channel output compare, 1-channel free run timer

• 2 built-in clock generator systems

• Low power modes

Stop, sleep, CPU intermittent mode, watch mode, etc.

• Package options

QFP100/LQFP100

• Process

CMOS technology

• Supply voltage

Can operate on 3 V single supply systems (with 5 V interface provided by some pins with 3/5 V dual-supply capability)