Evaluation Board

■DESCRIPTION The MB39A102 is a 4-channel DC/DC converter IC using pulse width modulation (PWM). This IC is ideal for up conversion, down conversion, and up/down conversion. 4ch is built in TSSOP-30P/BCC-32P package. Each channel can be controlled, and soft-start. This is an ideal power supply f

文件：428.58 Kbytes 页数：24 Pages

Fujitsu

富士通

Evaluation Board

■DESCRIPTION The MB39A102 is a 4-channel DC/DC converter IC using pulse width modulation (PWM). This IC is ideal for up conversion, down conversion, and up/down conversion. 4ch is built in TSSOP-30P/BCC-32P package. Each channel can be controlled, and soft-start. This is an ideal power supply f

文件：428.58 Kbytes 页数：24 Pages

Fujitsu

富士通

Evaluation Board

■DESCRIPTION The MB39A102 is a 4-channel DC/DC converter IC using pulse width modulation (PWM). This IC is ideal for up conversion, down conversion, and up/down conversion. 4ch is built in TSSOP-30P/BCC-32P package. Each channel can be controlled, and soft-start. This is an ideal power supply f

文件：428.58 Kbytes 页数：24 Pages

Fujitsu

富士通

4-ch DC/DC Converter IC for low voltage

■ DESCRIPTION The MB39A103 is a 4-channel DC/DC converter IC using pulse width modulation (PWM). This IC is ideal for up conversion, down conversion, and up/down conversion. Achievement of low voltage start-up (1.7 V or more) enables operation from low voltage. 4ch is built in TSSOP-30P/package

文件：347.64 Kbytes 页数：33 Pages

Fujitsu

富士通

4-ch DC/DC Converter IC for low voltage

■ DESCRIPTION The MB39A103 is a 4-channel DC/DC converter IC using pulse width modulation (PWM). This IC is ideal for up conversion, down conversion, and up/down conversion. Achievement of low voltage start-up (1.7 V or more) enables operation from low voltage. 4ch is built in TSSOP-30P/package

文件：347.64 Kbytes 页数：33 Pages

Fujitsu

富士通

4-ch DC/DC Converter IC for low voltage

■ DESCRIPTION The MB39A103 is a 4-channel DC/DC converter IC using pulse width modulation (PWM). This IC is ideal for up conversion, down conversion, and up/down conversion. Achievement of low voltage start-up (1.7 V or more) enables operation from low voltage. 4ch is built in TSSOP-30P/package

文件：347.64 Kbytes 页数：33 Pages

Fujitsu

富士通

2-ch DC/DC Converter IC

■ DESCRIPTION The MB39A104 is a 2-channel DC/DC converter IC using pulse width modulation (PWM), incorporating an overcurrent protection circuit (requiring no current sense resistor). This IC is ideal for down conversion. Operating at high frequency reduces the value of coil. This is ideal for

文件：380.13 Kbytes 页数：36 Pages

Fujitsu

富士通

2-ch DC/DC Converter IC

■ DESCRIPTION The MB39A104 is a 2-channel DC/DC converter IC using pulse width modulation (PWM), incorporating an overcurrent protection circuit (requiring no current sense resistor). This IC is ideal for down conversion. Operating at high frequency reduces the value of coil. This is ideal for

文件：380.13 Kbytes 页数：36 Pages

Fujitsu

富士通

1-ch DC/DC Converter IC for low voltage

■ DESCRIPTION The MB39A105 is 1-channel DC/DC converter IC using pulse width modulation (PWM). This IC is ideal for up conversion. The minimum operating voltage is low (1.8 V) , and the MB39A105 is best for built-in power supply such as LCD monitors. Also the short-circuit protection detection o

文件：236.01 Kbytes 页数：27 Pages

Fujitsu

富士通

1-ch DC/DC Converter IC for low voltage

■ DESCRIPTION The MB39A105 is 1-channel DC/DC converter IC using pulse width modulation (PWM). This IC is ideal for up conversion. The minimum operating voltage is low (1.8 V) , and the MB39A105 is best for built-in power supply such as LCD monitors. Also the short-circuit protection detection o

文件：236.01 Kbytes 页数：27 Pages

Fujitsu

富士通