High-Speed, Micropower, Low-Voltage, SOT23, Rail-to-Rail I/O Comparators

General Description The MAX987/MAX988/MAX991/MAX992/MAX995/MAX996 single/dual/quad micropower comparators feature low-voltage operation and rail-to-rail inputs and outputs. Their operating voltage ranges from +2.5V to +5.5V, making them ideal for both 3V and 5V systems. These comparators also ope

文件：141.82 Kbytes 页数：12 Pages

Maxim

美信

High-Speed, Micropower, Low-Voltage

General Description The MAX987/MAX988/MAX991/MAX992/MAX995/MAX996 single/dual/quad micropower comparators feature low-voltage operation and rail-to-rail inputs and outputs. Their operating voltage ranges from +2.5V to +5.5V, making them ideal for both 3V and 5V systems. These comparators also ope

文件：329.88 Kbytes 页数：13 Pages

Maxim

美信

High-Speed, Micropower, Low-Voltage, SOT23, Rail-to-Rail IO Comparators

文件：329.88 Kbytes 页数：13 Pages

Maxim

美信

High-Speed, Micropower, Low-Voltage, SOT23, Rail-to-Rail I/O Comparators

文件：329.88 Kbytes 页数：13 Pages

Maxim

美信

高速、微功耗、低电压、SOT23封装、满摆幅输入/输出比较器

MAX987/MAX988/MAX991/MAX992/MAX995/MAX996单通道/双通道/四通道微功耗比较器具有低电压工作和轨到轨输入和输出。其工作电压范围为+2.5V至+5.5V，因此非常适合用于3V和5V系统。这些比较器还采用±1.25V至±2.75V双电源供电。每个比较器的电流消耗仅为48µA，同时实现120ns传播延迟。\n\n 输入偏置电流典型值为1.0pA，输入失调电压典型值为0.5mV。即便输入信号传送缓慢，内部迟滞也能确保干净的输出切换。\n\n 输出级的专门设计限制了开关时的电源电流浪涌，几乎消除了许多其他比较器常见的电源毛刺。MAX987/MAX • 传输延迟：120ns\n\n• 静态电源电流：48µA\n\n• +2.5V至+5.5V单电源供电\n\n• 共模输入电压范围扩展至供电轨以上250mV\n\n• 推挽输出级的灌电流和拉电流为8mA (MAX987/MAX991/MAX995)\n\n• 开漏输出电压超出VCC (MAX988/MAX992/MAX996)\n\n• 专门设计的输出级可降低输出开关电流，从而充分降低总体功耗\n\n• 1MHz开关频率下的电源电流为100µA\n\n• 过驱输入无反相\n\n• 采用节省空间的封装：\n• 5引脚SC70 (MAX987/MAX988)\n\n• 8引脚µMAX (MAX99;

ADI

亚德诺

Dual Per-Pin Parametric Measurement Units

General Description The MAX9949/MAX9950 dual parametric measurement units (PMUs) feature a small package size, wide force and measurement range, and high accuracy, making the devices ideal for automatic test equipment (ATE) and other instrumentation that requires a PMU per pin or per site. Featu

文件：286.63 Kbytes 页数：23 Pages

Maxim

美信

Dual Per-Pin Parametric Measurement Units

General Description The MAX9949/MAX9950 dual parametric measurement units (PMUs) feature a small package size, wide force and measurement range, and high accuracy, making the devices ideal for automatic test equipment (ATE) and other instrumentation that requires a PMU per pin or per site. Featu

文件：286.63 Kbytes 页数：23 Pages

Maxim

美信

Dual Per-Pin Parametric Measurement Units

General Description The MAX9949/MAX9950 dual parametric measurement units (PMUs) feature a small package size, wide force and measurement range, and high accuracy, making the devices ideal for automatic test equipment (ATE) and other instrumentation that requires a PMU per pin or per site. Featu

文件：286.63 Kbytes 页数：23 Pages

Maxim

美信

Dual Per-Pin Parametric Measurement Units

General Description The MAX9951/MAX9952 dual parametric measurement units (PMUs) feature a small package size, wide force and measurement range, and high accuracy, making the devices ideal for automatic test equipment (ATE) and other instrumentation that requires a PMU per pin or per site. The M

文件：499.5 Kbytes 页数：23 Pages

Maxim

美信

Dual Per-Pin Parametric Measurement Units

General Description The MAX9951/MAX9952 dual parametric measurement units (PMUs) feature a small package size, wide force and measurement range, and high accuracy, making the devices ideal for automatic test equipment (ATE) and other instrumentation that requires a PMU per pin or per site. The M

文件：499.5 Kbytes 页数：23 Pages

Maxim

美信