4-Pin 關P Voltage Monitors with Manual Reset Input

General Description The MAX811/MAX812 are low-power microprocessor (µP) supervisory circuits used to monitor power supplies in µP and digital systems. They provide excellent circuit reliability and low cost by eliminating external components and adjustments when used with 5Vpowered or 3V-powered

文件：185.41 Kbytes 页数：8 Pages

Maxim

美信

4-Pin 關P Voltage Monitors with Manual Reset Input

General Description The MAX811/MAX812 are low-power microprocessor (µP) supervisory circuits used to monitor power supplies in µP and digital systems. They provide excellent circuit reliability and low cost by eliminating external components and adjustments when used with 5V-powered or 3V-powered

文件：1.04255 Mbytes 页数：8 Pages

TGS

4引脚微处理器电压监测器，带有手动复位输入

MAX811/MAX812低功耗微处理器(µP)监控电路用于监控µP和数字系统中的电源。当与5V供电或3V供电电路一起使用时，它们无需外部元件，也不用进行调整，可实现非常可靠的低成本电路。MAX811/MAX812还提供去抖手动复位输入。\n\n 这些器件执行单一功能：每当VCC电源电压下降到预设阈值以下，它们都会将复位信号置位，并在VCC上升到复位阈值以上后将该信号保持置位状态至少140ms。两款器件的区别只在于MAX811具有低电平有效RESET输出（VCC低至1V时能处于正确的状态），而MAX812具有高电平有效RESET输出。复位比较器旨在忽略VCC的快速瞬变。复位阈值适用于 • 集成电压监控器通过添加手动复位提高了系统稳健性\n• 对3V、3.3V和5V电源电压进行精密监控\n\n• 上电复位脉冲宽度：140ms（最小值）\n• - 低电平有效RESET输出(MAX811)、RESET输出(MAX812)\n\n\n\n\n• 在整个温度范围内稳定可靠\n\n• 低至VCC = 1V时确保低电平有效RESET有效(MAX811)\n\n• 电源瞬变抗扰度\n\n\n\n\n• 节省电路板空间\n• 无需外部元件\n\n• 4引脚SOT143封装\n\n\n\n\n• 低功耗简化了电源要求\n• 电源电流：6µA;

ADI

亚德诺

4-Pin 關P Voltage Monitors with Manual Reset Input

General Description The MAX811/MAX812 are low-power microprocessor (µP) supervisory circuits used to monitor power supplies in µP and digital systems. They provide excellent circuit reliability and low cost by eliminating external components and adjustments when used with 5Vpowered or 3V-powered

文件：185.41 Kbytes 页数：8 Pages

Maxim

美信

4-Pin μP Voltage Monitors with Manual Reset Input

General Description The MAX811/MAX812 are low-power microprocessor (µP) supervisory circuits used to monitor power supplies in µP and digital systems. They provide excellent circuit reliability and low cost by eliminating external components and adjustments when used with 5Vpowered or 3V-powered

文件：144.83 Kbytes 页数：8 Pages

Maxim

美信

4-Pin 關P Voltage Monitors with Manual Reset Input

General Description The MAX811/MAX812 are low-power microprocessor (µP) supervisory circuits used to monitor power supplies in µP and digital systems. They provide excellent circuit reliability and low cost by eliminating external components and adjustments when used with 5V-powered or 3V-powered

文件：1.04255 Mbytes 页数：8 Pages

TGS

4-Pin uP Voltage Monitors with Manual Reset Input

General Description The MAX811/MAX812 are low-power microprocessor (µP) supervisory circuits used to monitor power supplies in µP and digital systems. They provide excellent circuit reliability and low cost by eliminating external components and adjustments when used with 5Vpowered or 3V-powered

文件：144.83 Kbytes 页数：8 Pages

Maxim

美信

4-Pin 關P Voltage Monitors with Manual Reset Input

General Description The MAX811/MAX812 are low-power microprocessor (µP) supervisory circuits used to monitor power supplies in µP and digital systems. They provide excellent circuit reliability and low cost by eliminating external components and adjustments when used with 5Vpowered or 3V-powered

文件：185.41 Kbytes 页数：8 Pages

Maxim

美信

4-Pin μP Voltage Monitors with Manual Reset Input

General Description The MAX811/MAX812 are low-power microprocessor (µP) supervisory circuits used to monitor power supplies in µP and digital systems. They provide excellent circuit reliability and low cost by eliminating external components and adjustments when used with 5Vpowered or 3V-powered

文件：144.83 Kbytes 页数：8 Pages

Maxim

美信

PLASTIC ENCAPSULATED DEVICES

General Description The MAX811/MAX812 are low-power microprocessor (µP) supervisory circuits used to monitor power supplies in µP and digital systems. They provide excellent circuit reliability and low cost by eliminating external components and adjustments when used with 5Vpowered or 3V-powered

文件：58.16 Kbytes 页数：8 Pages

Maxim

美信