5-Pin, Multiple-Input, Programmable Reset ICs

General Description The MAX6305–MAX6313 CMOS microprocessor (µP) supervisory circuits are designed to monitor more than one power supply. Ideal for monitoring both 5V and 3.3V in personal computer systems, these devices assert a system reset if any of the monitored supplies falls outside the prog

文件：104.48 Kbytes 页数：16 Pages

Maxim

美信

5-Pin, Multiple-Input, Programmable Reset ICs

文件：125.25 Kbytes 页数：11 Pages

Maxim

美信

5-Pin, Multiple-Input, Programmable Reset ICs

文件：104.8 Kbytes 页数：11 Pages

Maxim

美信

5-Pin, Multiple-Input, Programmable Reset ICs

文件：119.13 Kbytes 页数：11 Pages

Maxim

美信

Supervisory Circuit Evaluation Kit

文件：118.27 Kbytes 页数：8 Pages

Maxim

美信

5引脚、多输入、可编程复位IC

MAX6305–MAX6313 CMOS微处理器(µP)监控电路可用于监控多个电源。这些器件非常适合监控个人计算机系统中的5V和3.3V电源，如果任何受监控的电源电压超出编程阈值，即会将系统复位信号置位。其采用低电源电流(15µA)和小型封装，适合便携式应用。MAX6305–MAX6313经过专门设计，可忽略任何受监控电源上的快速瞬变。\n\n 这些器件采用SOT23-5封装，工厂编程的复位阈值范围为2.5V至5.0V（以100mV为增量），并具有四个上电复位超时周期。提供十个标准版本。有关非标准版本的供货情况，请联系工厂。\n\n   • 小型5引脚SOT23封装\n\n• 精密的出厂设置VCC复位阈值；2.5V至5V电压范围，增量为0.1V\n\n• 不受VCC快速瞬变的影响\n\n• 低至VCC = 1V时确保低电平有效RESET有效\n\n• 在整个温度范围内稳定可靠\n\n• 电源电流：8µA\n\n• 出厂设置的复位超时延迟范围为1ms（最小值）至1120ms（最小值）\n\n• 无需外部元件\n\n• 手动复位输入\n\n• 欠压/过压电源监控;

ADI

亚德诺

5-Pin, Multiple-Input, Programmable Reset ICs

General Description The MAX6305–MAX6313 CMOS microprocessor (µP) supervisory circuits are designed to monitor more than one power supply. Ideal for monitoring both 5V and 3.3V in personal computer systems, these devices assert a system reset if any of the monitored supplies falls outside the prog

文件：104.48 Kbytes 页数：16 Pages

Maxim

美信

5-Pin, Multiple-Input, Programmable Reset ICs

General Description The MAX6305–MAX6313 CMOS microprocessor (µP) supervisory circuits are designed to monitor more than one power supply. Ideal for monitoring both 5V and 3.3V in personal computer systems, these devices assert a system reset if any of the monitored supplies falls outside the prog

文件：104.48 Kbytes 页数：16 Pages

Maxim

美信

5-Pin, Multiple-Input, Programmable Reset ICs

General Description The MAX6305–MAX6313 CMOS microprocessor (µP) supervisory circuits are designed to monitor more than one power supply. Ideal for monitoring both 5V and 3.3V in personal computer systems, these devices assert a system reset if any of the monitored supplies falls outside the prog

文件：104.48 Kbytes 页数：16 Pages

Maxim

美信

5-Pin, Multiple-Input, Programmable Reset ICs

General Description The MAX6305–MAX6313 CMOS microprocessor (µP) supervisory circuits are designed to monitor more than one power supply. Ideal for monitoring both 5V and 3.3V in personal computer systems, these devices assert a system reset if any of the monitored supplies falls outside the prog

文件：104.48 Kbytes 页数：16 Pages

Maxim

美信