Fault-Protected, Low-Voltage, Quad SPST Analog Switches

General Description The MAX4711/MAX4712/MAX4713 are fault-protected, Rail-to-Rail®, low-voltage analog switches featuring low on-resistance and guaranteed on-resistance flatness over the specified signal range. Due to the fault protection feature the analog switch input (NO_ or NC_) and output (C

文件：411.26 Kbytes 页数：17 Pages

Maxim

美信

Fault-Protected, Low-Voltage, Quad SPST Analog Switches

文件：894.54 Kbytes 页数：17 Pages

Maxim

美信

故障保护、低电压、四路SPST模拟开关

MAX4711/MAX4712/MAX4713是故障保护、轨到轨、低压模拟开关，具有低导通电阻，并在额定信号范围内确保导通电阻平坦度。由于具有故障保护特性，模拟开关输入（NO_或NC_）和输出(COM_)引脚不对称。故障保护特性使得模拟输入可以超出正负电源，而器件不会从模拟输入消耗过量电流。如果模拟输入在开关打开时被驱动至供电轨以上，它将检测到故障并自行关闭，模拟开关输出将被钳位到与输入信号相同的极性电源，且不会超出供电轨。此特性可保护连接到输出的任何电子电路，使其免受模拟输入上的过压影响。\n\n MAX4711/MAX4712/MAX4713均为四通道单刀单掷(SPST)模拟开关 • 故障保护模拟输入\n\n• 断电时提供±12V故障保护\n\n• 使用±5V电源时提供±7V故障保护\n\n• 使用+5V电源时提供+12V和-7V故障保护\n\n• 使用+3V电源时提供+12V和-9V故障保护\n\n• 故障保护数字输入可能超过V+供电轨\n\n• 电源关闭时所有开关断开\n\n• 轨到轨信号处理\n\n• 在故障条件下，输出箝位至适当的电源电压\n\n• +25°C时RON为25Ω（最大值）\n\n• 通道间导通电阻匹配：1Ω（最大值）\n\n• 单电源、双电源供电\n\n• 与行业标准MAX391/MAX392/MAX393引脚兼容\n\n• TTL和CMOS兼容逻;

ADI

亚德诺

Fault-Protected, Low-Voltage, Quad SPST Analog Switches

General Description The MAX4711/MAX4712/MAX4713 are fault-protected, Rail-to-Rail®, low-voltage analog switches featuring low on-resistance and guaranteed on-resistance flatness over the specified signal range. Due to the fault protection feature the analog switch input (NO_ or NC_) and output (C

文件：411.26 Kbytes 页数：17 Pages

Maxim

美信

Fault-Protected, Low-Voltage, Quad SPST Analog Switches

General Description The MAX4711/MAX4712/MAX4713 are fault-protected, Rail-to-Rail®, low-voltage analog switches featuring low on-resistance and guaranteed on-resistance flatness over the specified signal range. Due to the fault protection feature the analog switch input (NO_ or NC_) and output (C

文件：411.26 Kbytes 页数：17 Pages

Maxim

美信

Fault-Protected, Low-Voltage, Quad SPST Analog Switches

General Description The MAX4711/MAX4712/MAX4713 are fault-protected, Rail-to-Rail®, low-voltage analog switches featuring low on-resistance and guaranteed on-resistance flatness over the specified signal range. Due to the fault protection feature the analog switch input (NO_ or NC_) and output (C

文件：411.26 Kbytes 页数：17 Pages

Maxim

美信

Fault-Protected, Low-Voltage, Quad SPST Analog Switches

General Description The MAX4711/MAX4712/MAX4713 are fault-protected, Rail-to-Rail®, low-voltage analog switches featuring low on-resistance and guaranteed on-resistance flatness over the specified signal range. Due to the fault protection feature the analog switch input (NO_ or NC_) and output (C

文件：411.26 Kbytes 页数：17 Pages

Maxim

美信

Fault-Protected, Low-Voltage, Quad SPST Analog Switches

General Description The MAX4711/MAX4712/MAX4713 are fault-protected, Rail-to-Rail®, low-voltage analog switches featuring low on-resistance and guaranteed on-resistance flatness over the specified signal range. Due to the fault protection feature the analog switch input (NO_ or NC_) and output (C

文件：411.26 Kbytes 页数：17 Pages

Maxim

美信

Fault-Protected, Low-Voltage, Quad SPST Analog Switches

General Description The MAX4711/MAX4712/MAX4713 are fault-protected, Rail-to-Rail®, low-voltage analog switches featuring low on-resistance and guaranteed on-resistance flatness over the specified signal range. Due to the fault protection feature the analog switch input (NO_ or NC_) and output (C

文件：411.26 Kbytes 页数：17 Pages

Maxim

美信

Fault-Protected, Low-Voltage, Quad SPST Analog Switches

General Description The MAX4711/MAX4712/MAX4713 are fault-protected, Rail-to-Rail®, low-voltage analog switches featuring low on-resistance and guaranteed on-resistance flatness over the specified signal range. Due to the fault protection feature the analog switch input (NO_ or NC_) and output (C

文件：411.26 Kbytes 页数：17 Pages

Maxim

美信