Ultra-High-Speed, Low-Distortion, Differentialto- Single-Ended Line Receivers with Enable

General Description The MAX4444/MAX4445 differential line receivers offer unparalleled high-speed, low-distortion performance. Using a three op amp instrumentation amplifier architecture, these ICs have symmetrical differential inputs and a single-ended output. They operate from ±5V supplies an

文件：87.29 Kbytes 页数：8 Pages

Maxim

美信

Fully Assembled and Tested Surface-Mount Board

文件：97.63 Kbytes 页数：4 Pages

Maxim

美信

超高速、低失真、差分至单端线接收器，带有使能端

MAX4444/MAX4445差分线路接收器提供出色的高速、低失真性能。这些IC采用三运算放大器仪表放大器架构，具有对称差分输入和单端输出。它们采用±5V电源供电，能够将100Ω负载驱动至±3.7V。MAX4444在内部设置+2V/V的闭环增益，而MAX4445则通过外部电阻设置，针对+2V/V或更大的增益进行了补偿。低功耗使能模式可将电流消耗降至3.5mA。\n\n MAX4444/MAX4445采用电流反馈技术，可实现550MHz带宽，同时保持高达5000V/µs的压摆率。这些放大器具有出色的差分增益/相位和噪声规格，是各种视频和RF信号处理应用的适宜之选。评估套件有助于加速设计 • 5000V/µs压摆率(MAX4444)\n\n• +2V/V内部固定增益(MAX4444)\n\n• 外部增益选择（MAX4445，AVCL ≥ +2V/V）\n\n• -3dB带宽为550MHz\n\n• 5MHz时的SFDR为-60dB\n\n• 低差分增益/相位：0.07%/0.05°\n\n• 低噪声：fIN = 100kHz时为25nV/\n\n• 低功耗禁用模式将静态电流降至3.5mA;

ADI

亚德诺

Ultra-High-Speed, Low-Distortion, Differentialto- Single-Ended Line Receivers with Enable

General Description The MAX4444/MAX4445 differential line receivers offer unparalleled high-speed, low-distortion performance. Using a three op amp instrumentation amplifier architecture, these ICs have symmetrical differential inputs and a single-ended output. They operate from ±5V supplies an

文件：87.29 Kbytes 页数：8 Pages

Maxim

美信

Fully Assembled and Tested Surface-Mount Board

文件：97.63 Kbytes 页数：4 Pages

Maxim

美信

包装：盒 功能：缓冲器/接收器 类别：开发板，套件，编程器 评估和演示板及套件 描述：EVAL KIT MAX4444, MAX4445

AD

亚德诺