Single/Dual/Quad, 28MHz, Low-Noise, Low-Voltage, Precision Op Amps

General Description The MAX410/MAX412/MAX414 single/dual/quad op amps set a new standard for noise performance in high-speed, low-voltage systems. Input voltage-noise density is guaranteed to be less than 2.4nV/√Hz at 1kHz. A unique design not only combines low noise with ±5V operation, but also

文件：461.17 Kbytes 页数：12 Pages

Maxim

美信

Single/Dual/Quad, 28MHz, Low-Noise, Low-Voltage, Precision Op Amps

文件：325.27 Kbytes 页数：16 Pages

Maxim

美信

单通道/双通道/四通道、28MHz、低噪声、低电压、精密运算放大器

MAX410/MAX412/MAX414单通道/双通道/四通道运算放大器为高速、低压系统的噪声性能设立了新标准。在1kHz时，输入电压噪声密度确保小于2.4nV/root-Hz。专门的设计不仅噪声低、支持±5V工作，而且每个放大器的电源电流消耗仅为2.5mA。使用±5V电源供电时，输出电压摆幅为7.3VP-P，可确保2kΩ下的低电压工作。MAX410/MAX412/MAX414还可以在±2.4V和±5V之间的电源电压下工作，以实现更大的电源灵活性。\n\n 单位增益稳定性、28MHz带宽和4.5V/µs压摆率可确保在各种宽带和测量应用中提供低噪声性能。MAX410/MAX412/MA • 电压噪声：1kHz时为2.4nV/root-Hz（最大值）\n\n• 2.5mA电源电流（每个放大器）\n\n• 低电源电压供电：±2.4V至±5V\n\n• 单位增益带宽：28MHz\n\n• 压摆率：4.5V/µs\n\n• 失调电压：250µV（最大值，MAX410/MAX412）\n\n• 电压增益：115dB（最小值）\n\n• 采用超小型TDFN封装;

ADI

亚德诺

Single/Dual/Quad, 400MHz, Low-Power, Current Feedback Amplifiers

General Description The single MAX4112/MAX4113, dual MAX4117/MAX4118, and quad MAX4119/MAX4120 current feedback amplifiers combine high-speed performance with low-power operation. The MAX4112/MAX4117/MAX4119 are optimized for closed-loop gains of 2V/V or greater, while the MAX4113/MAX4118/MAX4120

文件：167.79 Kbytes 页数：12 Pages

Maxim

美信

Single/Dual/Quad, 400MHz, Low-Power, Current Feedback Amplifiers

General Description The single MAX4112/MAX4113, dual MAX4117/MAX4118, and quad MAX4119/MAX4120 current feedback amplifiers combine high-speed performance with low-power operation. The MAX4112/MAX4117/MAX4119 are optimized for closed-loop gains of 2V/V or greater, while the MAX4113/MAX4118/MAX4120

文件：167.79 Kbytes 页数：12 Pages

Maxim

美信

Single/Dual/Quad, 400MHz, Low-Power, Current Feedback Amplifiers

General Description The single MAX4112/MAX4113, dual MAX4117/MAX4118, and quad MAX4119/MAX4120 current feedback amplifiers combine high-speed performance with low-power operation. The MAX4112/MAX4117/MAX4119 are optimized for closed-loop gains of 2V/V or greater, while the MAX4113/MAX4118/MAX4120

文件：167.79 Kbytes 页数：12 Pages

Maxim

美信

330MHz Buffered Video Switches/ Crosspoint Building Blocks

General Description The MAX4111/MAX4121/MAX4221 wideband video switches are optimized for high-definition, broadcastquality, composite (HDTV, NTSC, PAL, SECAM, and RGB) video switching arrays. Their open-loop buffer amplifiers offer 0.1dB gain flatness to 150MHz. They operate from ±5V supplies an

文件：100.14 Kbytes 页数：12 Pages

Maxim

美信

330MHz Buffered Video Switches/ Crosspoint Building Blocks

General Description The MAX4111/MAX4121/MAX4221 wideband video switches are optimized for high-definition, broadcastquality, composite (HDTV, NTSC, PAL, SECAM, and RGB) video switching arrays. Their open-loop buffer amplifiers offer 0.1dB gain flatness to 150MHz. They operate from ±5V supplies an

文件：100.14 Kbytes 页数：12 Pages

Maxim

美信

Single/Dual/Quad, Wide-Bandwidth, Low-Power, Single-Supply Rail-to-Rail I/O Op Amps

General Description The MAX4122–MAX4129 family of operational amplifiers combines wide bandwidth and excellent DC accuracy with Rail-to-Rail® operation at the inputs and outputs. These devices require only 650µA per amplifier, and operate from either a single supply (+2.7V to +6.5V) or dual suppl

文件：285.83 Kbytes 页数：16 Pages

Maxim

美信

Single/Dual/Quad, Wide-Bandwidth, Low-Power, Single-Supply Rail-to-Rail I/O Op Amps

General Description The MAX4122–MAX4129 family of operational amplifiers combines wide bandwidth and excellent DC accuracy with Rail-to-Rail® operation at the inputs and outputs. These devices require only 650µA per amplifier, and operate from either a single supply (+2.7V to +6.5V) or dual suppl

文件：285.83 Kbytes 页数：16 Pages

Maxim

美信