1.6關A, RS-485/RS-422, Half-Duplex, Differential Transceiver for Battery-Powered Systems

General Description The MAX3471 half-duplex transceiver is intended for lithium battery-powered RS-485/RS-422 applications. It draws only 1.6µA (typical) supply current from a 3.6V supply with the receiver enabled and the driver disabled. Its wide 2.5V to 5.5V supply voltage guarantees operation

文件：86.84 Kbytes 页数：8 Pages

Maxim

美信

1.6µA、RS-485/RS-422、半双工、差分收发器，用于电池供电系统

MAX3471半双工收发器适用于锂电池供电的RS-485/RS-422应用。在接收器使能和驱动器禁用时，它采用3.6V电源的电源电流消耗仅为1.6µA（典型值）。其2.5V至5.5V的宽电源电压可确保在锂电池的整个使用寿命期间正常工作。\n\n 该器件具有真正的故障安全操作，可在接收器输入开路或短路时确保接收器输出为逻辑高电平。这意味着如果端接总线上的所有发射器都被禁用（高阻抗），接收器输出将为逻辑高电平。MAX3471具有1/8单位负载输入电阻。当驱动器输出使能并将被拉至高于VCC或低于GND时，内部电路可防止电池反向充电。\n\n MAX3471采用8引脚µMAX封装。 • 接收器使能时的电源电流为1.6µA\n\n• +2.5V至+5.5V单电源供电\n\n• 真正的故障安全接收器输入\n\n• 采用µMAX封装\n\n• 1/8单位负载接收器输入\n\n• 共模输入电压范围：-7V至+10V;

ADI

亚德诺

1.6關A, RS-485/RS-422, Half-Duplex, Differential Transceiver for Battery-Powered Systems

General Description The MAX3471 half-duplex transceiver is intended for lithium battery-powered RS-485/RS-422 applications. It draws only 1.6µA (typical) supply current from a 3.6V supply with the receiver enabled and the driver disabled. Its wide 2.5V to 5.5V supply voltage guarantees operation

文件：86.84 Kbytes 页数：8 Pages

Maxim

美信

1.6muA, RS-485/RS-422, Half-Duplex, Differential Transceiver for Battery-Powered Systems

General Description The MAX3471 half-duplex transceiver is intended for lithium battery-powered RS-485/RS-422 applications. It draws only 1.6µA (typical) supply current from a 3.6V supply with the receiver enabled and the driver disabled. Its wide 2.5V to 5.5V supply voltage guarantees operation

文件：89.53 Kbytes 页数：8 Pages

Maxim

美信

1.6muA, RS-485/RS-422, Half-Duplex, Differential Transceiver for Battery-Powered Systems

General Description The MAX3471 half-duplex transceiver is intended for lithium battery-powered RS-485/RS-422 applications. It draws only 1.6µA (typical) supply current from a 3.6V supply with the receiver enabled and the driver disabled. Its wide 2.5V to 5.5V supply voltage guarantees operation

文件：89.53 Kbytes 页数：8 Pages

Maxim

美信

1.6關A, RS-485/RS-422, Half-Duplex, Differential Transceiver for Battery-Powered Systems

General Description The MAX3471 half-duplex transceiver is intended for lithium battery-powered RS-485/RS-422 applications. It draws only 1.6µA (typical) supply current from a 3.6V supply with the receiver enabled and the driver disabled. Its wide 2.5V to 5.5V supply voltage guarantees operation

文件：86.84 Kbytes 页数：8 Pages

Maxim

美信

Package：8-TSSOP，8-MSOP（0.118"，3.00mm 宽）；包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 类别：集成电路（IC） 驱动器，接收器，收发器 描述：IC TRANSCEIVER HALF 1/1 8UMAX

AD

亚德诺

Package：8-TSSOP，8-MSOP（0.118"，3.00mm 宽）；包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 类别：集成电路（IC） 驱动器，接收器，收发器 描述：IC TRANSCEIVER HALF 1/1 8UMAX

AD

亚德诺

Package：8-TSSOP，8-MSOP（0.118"，3.00mm 宽）；包装：管件 类别：集成电路（IC） 驱动器，接收器，收发器 描述：IC TRANSCEIVER HALF 1/1 8UMAX

AD

亚德诺