±15kV ESD-Protected, High-Drive Current, Dual-/Quad-/ Octal-Level Translators with Speed-Up Circuitry

General Description The MAX3394E/MAX3395E/MAX3396E bidirectional level translators provide level shifting required for data transfer in a multivoltage system. Internal slew-rate enhancement circuitry features 10mA current-sink and 15mA current-source drivers to isolate capacitive loads from lower

文件：556.61 Kbytes 页数：20 Pages

Maxim

美信

±15kV ESD-Protected, High-Drive Current, Dual-/Quad-/ Octal-Level Translators with Speed-Up Circuitry

General Description The MAX3394E/MAX3395E/MAX3396E bidirectional level translators provide level shifting required for data transfer in a multivoltage system. Internal slew-rate enhancement circuitry features 10mA current-sink and 15mA current-source drivers to isolate capacitive loads from lower

文件：556.61 Kbytes 页数：20 Pages

Maxim

美信

±15kV ESD-Protected, High-Drive Current, Dual-/Quad-/ Octal-Level Translators with Speed-Up Circuitry

General Description The MAX3394E/MAX3395E/MAX3396E bidirectional level translators provide level shifting required for data transfer in a multivoltage system. Internal slew-rate enhancement circuitry features 10mA current-sink and 15mA current-source drivers to isolate capacitive loads from lower

文件：556.61 Kbytes 页数：20 Pages

Maxim

美信

±15kV ESD保护、大电流驱动、双/四/八通道电平转换器，带有加速电路

MAX3394E/MAX3395E/MAX3396E双向电平转换器可为多电压系统中的数据传输提供所需的电平转换功能。内部摆率增强电路具有10mA吸入电流和15mA源出电流驱动器，从而将容性负载与较低的电流驱动器隔离。开漏极系统中，摆率增强电路能够在大的总线负载电容情况下采用较小的上拉电阻以加快数据速率。外部电源电压VCC和VL设置了该器件的逻辑高电平。在器件一侧I/O加逻辑低信号时将在另一侧I/O也产生逻辑低信号，反之亦然。每一条I/O线通过内部上拉电阻上拉至VCC或VL，允许通过推挽或开漏极驱动器来驱动器件。\n MAX3394E/MAX3395E/MAX3396E具有三态输出模式和热关断保 \n• 双向电平转换无需方向引脚 \n• 摆率增强电路支持较大的容性负载和较小的外部上拉电阻 \n• 宽电源电压范围：VL低至+1.2V，VCC低至+1.65V \n• 低静态电流 \n• UCSP、TDFN和TQFN封装;

ADI

亚德诺