20Mbps, 3.3V, SOT23 RS-485/ RS-422 Transmitters

General Description The MAX3293/MAX3294/MAX3295 low-power, high speed transmitters for RS-485/RS-422 communication operate from a single +3.3V power supply. These devices contain one differential transmitter. The MAX3295 transmitter operates at data rates up to 20Mbps, with an output skew of le

文件：316.65 Kbytes 页数：11 Pages

Maxim

美信

PLASTIC ENCAPSULATED DEVICES

General Description The MAX3293/MAX3294/MAX3295 low-power, high speed transmitters for RS-485/RS-422 communication operate from a single +3.3V power supply. These devices contain one differential transmitter. The MAX3295 transmitter operates at data rates up to 20Mbps, with an output skew of le

文件：103.4 Kbytes 页数：8 Pages

Maxim

美信

20Mbps, 3.3V, SOT23 RS-485/ RS-422 Transmitters

文件：295.32 Kbytes 页数：11 Pages

Maxim

美信

20Mbps, 3.3V, SOT23 RS-485/ RS-422 Transmitters

文件：1.84485 Mbytes 页数：12 Pages

Maxim

美信

20Mbps、+3.3V、SOT23封装、RS-485/RS-422发送器

MAX3293/MAX3294/MAX3295为用于RS-485/RS-422通信的低功耗、高速率发送器，运行于+3.3V单电源；这些器件包括差分发送器。MAX3295发送器数据速率可高达20Mbps，定时失配小于5ns，可保证的驱动器传输延迟低于25ns。为最小化EMI和减少由不适当终端电缆造成的反射，MAX3293 (250kbps)和MAX3294 (2.5Mbps)采用限摆率方案。\n\n MAX3293/MAX3294/MAX3295在标准54Ω负载条件下来保证+1.5V的幅度，符合RS-485规范。空载时传送器需要5mA的电源电流；低功耗关断模式(DE = GND)下为1 • 节省空间的6引脚SOT23封装\n• 250kbps/2.5Mbps/20Mbps数据速率可用 \n• +3.3V单电源运行\n• ESD保护\n• ±9kV人体模型\n\n\n• 受限的摆率保证数据传输正确(MAX3293/MAX3294) \n• 1µA低流耗关断模式 \n• -7V至+12V公用方式输入电压范围 \n• 电流限制及热关断为驱动器过载提供保护 \n• 输入支持热插拔用于电信应用\n• 汽车用温度范围(-40°C至+125°C)\n• 通过了 AEC-Q100 MAX3295AUT/V+T 认证;

ADI

亚德诺

20Mbps, 3.3V, SOT23 RS-485/ RS-422 Transmitters

General Description The MAX3293/MAX3294/MAX3295 low-power, high speed transmitters for RS-485/RS-422 communication operate from a single +3.3V power supply. These devices contain one differential transmitter. The MAX3295 transmitter operates at data rates up to 20Mbps, with an output skew of le

文件：295.32 Kbytes 页数：11 Pages

Maxim

美信

20Mbps, 3.3V, SOT23 RS-485/ RS-422 Transmitters

General Description The MAX3293/MAX3294/MAX3295 low-power, high speed transmitters for RS-485/RS-422 communication operate from a single +3.3V power supply. These devices contain one differential transmitter. The MAX3295 transmitter operates at data rates up to 20Mbps, with an output skew of le

文件：316.65 Kbytes 页数：11 Pages

Maxim

美信

20Mbps, 3.3V, SOT23 RS-485/ RS-422 Transmitters

文件：295.32 Kbytes 页数：11 Pages

Maxim

美信

20Mbps, 3.3V, SOT23 RS-485/RS-422 Transmitters

文件：1.84339 Mbytes 页数：11 Pages

Maxim

美信

20Mbps, 3.3V, SOT23 RS-485/ RS-422 Transmitters

文件：1.84485 Mbytes 页数：12 Pages

Maxim

美信