VHF-to-Microwave, 3V, General-Purpose Amplifiers

General Description The MAX2630/MAX2631/MAX2632/MAX2633 are low voltage, low-noise amplifiers for use from VHF to microwave frequencies. Operating from a single +2.7V to +5.5V supply, these devices have a flat gain response to 900MHz. Their low noise figure and low supply current make them idea

文件：282.61 Kbytes 页数：12 Pages

Maxim

美信

VHF至微波、+3V、通用放大器

MAX2630/MAX2631/MAX2632/MAX2633是低压、低噪声放大器，适用于VHF至微波频率范围。这些器件采用+2.7V至+5.5V单电源供电，对900MHz提供平坦的增益响应。其具有低噪声系数和低电源电流，因此非常适合接收、缓冲和发射IF应用。\n\n MAX2630/MAX2631提供内部偏置，无需外部偏置电阻或电感。MAX2632/MAX2633具有用户可选的电源电流，可通过添加单个外部电阻进行调节。这有助于根据特定应用要求定制输出功率和增益。MAX2631/MAX2633可通过一个关断引脚关断，使电源电流降至1µA以下。除了MAX2632/MAX2633需要单个 • +2.7V至+5.5V单电源供电\n• 内部偏置(MAX2630/MAX2631)\n• 可调偏置(MAX2632/MAX2633)\n• 电源电流：6.6mA（对电源电压不敏感）\n• 关断电流：1µA (MAX2631/MAX2633)\n• 噪声系数：3.7dB\n• 增益：13.4dB\n• 超小型SOT封装;

ADI

亚德诺

VHF-to-Microwave, 3V, General-Purpose Amplifiers

General Description The MAX2630/MAX2631/MAX2632/MAX2633 are low voltage, low-noise amplifiers for use from VHF to microwave frequencies. Operating from a single +2.7V to +5.5V supply, these devices have a flat gain response to 900MHz. Their low noise figure and low supply current make them idea

文件：282.61 Kbytes 页数：12 Pages

Maxim

美信

VHF-to-Microwave, 3V, General-Purpose Amplifiers

文件：263.19 Kbytes 页数：12 Pages

Maxim

美信

Package：TO-253-4，TO-253AA；包装：盒 类别：RF/IF，射频/中频和 RFID 射频放大器 描述：IC AMP CELL 100MHZ-1GHZ SOT143-4

AD

亚德诺

Package：TO-253-4，TO-253AA；包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 类别：RF/IF，射频/中频和 RFID 射频放大器 描述：IC AMP CELL 100MHZ-1GHZ SOT143-4

AD

亚德诺