Multirange, Single V, 12-Bit DAS with 12-Bit Bus Interface

General Description The MAX196/MAX198 multirange, 12-bit data-acquisition systems (DAS) require only a single +5V supply for operation, yet convert analog signals at their inputs up to ±10V (MAX196) and ±4V (MAX198). These systems provide six analog input channels that are indepen dently software

文件：165.65 Kbytes 页数：16 Pages

Maxim

美信

Jumper-Selectable Configuration

文件：205.92 Kbytes 页数：8 Pages

Maxim

美信

6通道、多量程、5V、12位DAS，带有12位总线接口和故障保护

MAX196/MAX198多量程、12位数据采集系统(DAS)仅需要一个+5V单电源供电即可将输入端的模拟信号转换为高达±10V (MAX196)和±4V (MAX198)。这些系统提供六个可通过软件独立编程为各种范围的模拟输入通道：MAX196为±10V、±5V、0V至+10V以及0V至+5V；MAX198为±VREF、±VREF/2、0V至+VREF以及0V至+VREF/2。这种范围切换将有效动态范围增加到14位，并支持灵活地将±12V、±15V和4mA至20mA供电传感器连接到单个+5V系统。此外，这些转换器还受±16.5V故障保护；任何通道上发生故障都不会影响选定通道的转换结果。其他特 • 12位分辨率、1/2 LSB线性度\n\n• +5V单电源供电\n\n• 软件可选输入范围：\n• ±10V、±5V、0V至+10V、0V至+5V (MAX196)\n\n• ±VREF、±VREF/2、0V至+VREF、0V至+VREF/2(MAX198)\n\n\n\n\n• 内部4.096V或外部基准电压源\n\n• 故障保护的输入多路复用器\n\n• 6个模拟输入通道\n\n• 6µs转换时间，100ksps采样速率\n\n• 内部或外部采集控制\n\n• 两种关断模式\n\n• 内部或外部时钟;

ADI

亚德诺

2.35V to 5.5V, 0.5 Accurate, 1MHz PWM Step-Down Controllers with Voltage Margining

General Description The MAX1960/MAX1961/MAX1962 high-current, high efficiency voltage-mode step-down DC-DC controllers operate from a 2.35V to 5.5V input and generate output voltages down to 0.8V at up to 20A. An on-chip charge pump generates a regulated 5V for MOSFET drive. Additionally, adaptiv

文件：455.52 Kbytes 页数：29 Pages

Maxim

美信

2.35V to 5.5V, 0.5 Accurate, 1MHz PWM Step-Down Controllers with Voltage Margining

General Description The MAX1960/MAX1961/MAX1962 high-current, high efficiency voltage-mode step-down DC-DC controllers operate from a 2.35V to 5.5V input and generate output voltages down to 0.8V at up to 20A. An on-chip charge pump generates a regulated 5V for MOSFET drive. Additionally, adaptiv

文件：455.52 Kbytes 页数：29 Pages

Maxim

美信

2.35V to 5.5V, 0.5 Accurate, 1MHz PWM Step-Down Controllers with Voltage Margining

General Description The MAX1960/MAX1961/MAX1962 high-current, high efficiency voltage-mode step-down DC-DC controllers operate from a 2.35V to 5.5V input and generate output voltages down to 0.8V at up to 20A. An on-chip charge pump generates a regulated 5V for MOSFET drive. Additionally, adaptiv

文件：455.52 Kbytes 页数：29 Pages

Maxim

美信

2.35V to 5.5V, 0.5 Accurate, 1MHz PWM Step-Down Controllers with Voltage Margining

General Description The MAX1960/MAX1961/MAX1962 high-current, high efficiency voltage-mode step-down DC-DC controllers operate from a 2.35V to 5.5V input and generate output voltages down to 0.8V at up to 20A. An on-chip charge pump generates a regulated 5V for MOSFET drive. Additionally, adaptiv

文件：455.52 Kbytes 页数：29 Pages

Maxim

美信

2.35V to 5.5V, 0.5 Accurate, 1MHz PWM Step-Down Controllers with Voltage Margining

General Description The MAX1960/MAX1961/MAX1962 high-current, high efficiency voltage-mode step-down DC-DC controllers operate from a 2.35V to 5.5V input and generate output voltages down to 0.8V at up to 20A. An on-chip charge pump generates a regulated 5V for MOSFET drive. Additionally, adaptiv

文件：455.52 Kbytes 页数：29 Pages

Maxim

美信

2.35V to 5.5V, 0.5 Accurate, 1MHz PWM Step-Down Controllers with Voltage Margining

General Description The MAX1960/MAX1961/MAX1962 high-current, high efficiency voltage-mode step-down DC-DC controllers operate from a 2.35V to 5.5V input and generate output voltages down to 0.8V at up to 20A. An on-chip charge pump generates a regulated 5V for MOSFET drive. Additionally, adaptiv

文件：455.52 Kbytes 页数：29 Pages

Maxim

美信

Low-Input-Voltage, 300mA LDO Regulators with RESETin SOT and TDFN

General Description The MAX1963/MAX1976 low-dropout linear regulators operate from a +1.62V to +3.6V supply and deliver a guaranteed 300mA continuous load current with a low 100mV dropout. The high-accuracy (±0.5) output voltage is preset to an internally trimmed voltage in the +0.75V to +3.0V ra

文件：354.81 Kbytes 页数：12 Pages

Maxim

美信