HD-DVI1.4 3-In 1-Out Switch

The Lontium LT8631UX HDMI2.0/1.4 Switch features a 3:1 switch compliant to HDMI2.0/1.4 specification, max 6Gbps high speed data rate, adaptive equalization RX input and pre-emphasized TX output to support long cable application, no XTAL on board to save BOM cost .\n\nLT8631UX HDMI2.0/1.4 Switch auto • 3 inputs, 1output HDMI/DVIlinks\n• HDMI 1.4/2.0/DVI 1.0compliant\n• Supports data rates up to 6Gbps\n• RX side ODTs and management circuitry\n• Integrated HPD switch, DDC switch, and +5V Power indicator switch, greatly lowering the cost and simplifying the manufacturing process\n• Source/Sink conn;

Lontium

龙迅股份

HDMI2.0/1.4 3-In 1-Out Switch

The LT8631UXE HD-DVI2.0/1.4 Switch features a 3:1switch compliant with HD-DVI2.0/1.4 specification, max 6Gbps high speed data rate, adaptive equalization RX input and pre-emphasized TX output to support long cable application, no XTAL on board to save BOM cost.LT8631UXE HD-DVI2.0/1.4 Switch automati • 3 inputs, 1output HD-DVI/DVI links\n• HD-DVI 1.4/2.0/DVI 1.0compliant\n• Supports data rates up to 6Gbps\n• RX side ODTs and management circuitry\n• Integrated HPD switch, DDC switch, and +5V Power indicator switch, greatly lowering the cost and simplifying the manufacturing process\n• Source/Sink;

Lontium

龙迅股份

1x/1.5x/2x White LED Charge Pump with Two LDOs in 4mm x 4mm Thin QFN

文件：266.72 Kbytes 页数：15 Pages

Maxim

美信

1x/1.5x/2x White LED Charge Pump with Two LDOs in 4mm x 4mm Thin QFN

General Description The MAX8631X/Y charge pump drives up to eight white LEDs with regulated constant current for uniform intensity. The main group of LEDs (M1–M4) can be driven up to 30mA per LED for backlighting. The flash group of LEDs (F1–F4) is independently controlled and can be driven up to

文件：399.16 Kbytes 页数：16 Pages

Maxim

美信

1x/1.5x/2x White LED Charge Pump with Two LDOs in 4mm x 4mm Thin QFN

General Description The MAX8631X/Y charge pump drives up to eight white LEDs with regulated constant current for uniform intensity. The main group of LEDs (M1–M4) can be driven up to 30mA per LED for backlighting. The flash group of LEDs (F1–F4) is independently controlled and can be driven up to

文件：399.16 Kbytes 页数：16 Pages

Maxim

美信