首页>LP87561-Q1>规格书详情
LP87561-Q1中文资料PDF规格书
LP87561-Q1规格书详情
1 Features
1• Qualified for Automotive Applications
• AEC-Q100 Qualified With the Following Results:
– Device Temperature Grade 1: –40°C to
+125°C Ambient Operating Temperature
– Device HBM ESD Classification Level 2
– Device CDM ESD Classification Level C4B
• Input Voltage: 2.8 V to 5.5 V
• Output Voltage: 0.6 V to 3.36 V
• Four High-Efficiency Step-Down DC/DC Converter
Cores:
– Maximum Output Current: 16 A (4 A per
Phase)
– Programmable Output Voltage Slew-Rate:
0.5 mV/μs to 10 mV/μs
• Switching Frequency: 2 MHz
• Spread-Spectrum Mode and Phase Interleaving
• Configurable General Purpose I/O (GPIOs)
• I2C-Compatible Interface That Supports Standard
(100 kHz), Fast (400 kHz), Fast+ (1 MHz), and
High-Speed (3.4 MHz) Modes
• Interrupt Function With Programmable Masking
• Programmable Power-Good Signal (PGOOD)
• Output Short-Circuit and Overload Protection
• Overtemperature Warning and Protection
• Overvoltage Protection (OVP) and Undervoltage
Lockout (UVLO)
2 Applications
Automotive Infotainment, Cluster, Radar, and
Camera Power Applications
3 Description
The LP8756x-Q1 device is designed to meet the
power-management requirements of the latest
processors and platforms in various automotive
power applications. The device contains four stepdown
DC/DC converter cores, which are configured
as a 4-phase output, 3-phase and 1-phase outputs,
2-phase and 2-phase outputs, one 2-phase and two
1-phase outputs, or four 1-phase outputs. The device
is controlled by an I2C-compatible serial interface and
by enable signals.
The automatic pulse-width-modulation (PWM) to
pulsed-frequency-modulation (PFM) operation (AUTO
mode), together with the automatic phase adding and
phase shedding, maximizes efficiency over a wide
output-current range. The LP8756x-Q1 supports
remote differential-voltage sensing for multiphase
outputs to compensate IR drop between the regulator
output and the point-of-load (POL) improving the
accuracy of the output voltage. The switching clock
can be forced to PWM mode and also synchronized
to an external clock to minimize the disturbances.
The LP8756x-Q1 device supports load-current
measurement without the addition of external currentsense
resistors. The device also supports
programmable start-up and shutdown delays and
sequences synchronized to enable signals. The
sequences can include GPIO signals to control
external regulators, load switches, and processor
reset. During start-up and voltage change, the device
controls the output slew rate to minimize outputvoltage
overshoot and in-rush current.
供应商 | 型号 | 品牌 | 批号 | 封装 | 库存 | 备注 | 价格 |
---|---|---|---|---|---|---|---|
TI |
23+ |
VQFN-26 |
10065 |
原装正品,有挂有货,假一赔十 |
询价 | ||
Texas Instruments |
22+/23+ |
26-VQFN-HR(4.5x4) |
7500 |
原装进口公司现货假一赔百 |
询价 | ||
TI |
新批次 |
VQFN-HR26 |
4326 |
询价 | |||
TI/德州仪器 |
22+ |
VQFN-HR-26 |
9600 |
原装现货,优势供应,支持实单! |
询价 | ||
Texas Instruments |
21+ |
26-PowerVFQFN |
2794 |
正规渠道/品质保证/原装正品现货 |
询价 | ||
TI |
23+ |
开发板 |
368 |
确保原装正品,一站式BOM配单 |
询价 | ||
TI |
23+ |
VQFN-HR-26 |
10000 |
原装进口只做订货 TI渠道 |
询价 | ||
TI(德州仪器) |
2112+ |
VQFN-26-HR(4.5x4) |
105000 |
3000个/圆盘一级代理专营品牌!原装正品,优势现货, |
询价 | ||
Texas Instruments |
24+ |
26-PowerVFQFN |
9350 |
独立分销商,公司只做原装,诚心经营,免费试样正品保证 |
询价 | ||
TI/德州仪器 |
2019+ |
VQFN-HR-26 |
13000 |
询价 |