LMK5B33216RGCT.A中文资料德州仪器数据手册PDF规格书

1 Features

• Ultra-low jitter BAW VCO based Ethernet clocks

– 13fs typical RMS jitter at 625MHz with 4MHz 1st

order high-pass filter (HPF)

– 24fs typical RMS jitter at 312.5MHz with 4MHz

1st order HPF

– 42fs typical/ 60fs maximum RMS jitter at

312.5MHz

– 47fs typical/ 65fs maximum RMS jitter at

156.25MHz

• Three high-performance Digital Phase Locked

Loops (DPLLs) with paired Analog Phase Locked

Loops (APLLs)

– Programmable DPLL loop bandwidth from

1mHz to 4kHz

– < 1ppt DCO frequency adjustment step size

• Two differential or single-ended DPLL inputs

– 1Hz (1PPS) to 800MHz input frequency

– Digital holdover and hitless switching

• 16 differential outputs with programmable HSDS,

AC-LVPECL, LVDS, and HSCL formats

– Up to 20 total frequency outputs when

configured with 6 LVCMOS frequency outputs

on OUT[1:0]_P/N, GPIO1, and GPIO2 and 14

differential outputs on OUT[15:0]_P/N

– 1Hz (1PPS) to 1250MHz output frequency with

programmable swing and common mode

– PCIe Gen 1 to 6 compliant

• I2C, 3-wire SPI, or 4-wire SPI

• –40°C to 85°C operating temperature

2 Applications

• Wired networking

– Inter/Intra DC interconnect

– Timing card, line card, fixed card (pizza box)

• SyncE (G.8262), SONET/SDH (Stratum 3/3E,

G.813, GR-1244, GR-253), IEEE-1588 PTP

secondary clock

• Jitter cleaning, wander attenuation, and reference

clock generation for 112G/224G PAM-4 SerDes

• 100G-800G data center switches, core routers,

edge routers, WLAN

• Data center and enterprise computing

– Smart Network Interface Card (NIC)

• Optical Transport Networks (OTN G.709)

• Broadband fixed line access

• Industrial

– Test and measurement

– Medical imaging

3 Description

The LMK5B33216 is a high-performance network

synchronizer and jitter cleaner designed to meet the

stringent requirements of ethernet-based networking

applications with < 5ns timing accuracy (ITU-T

G.8273.2 Class D).

The device integrates three DPLLs and three APLLs

to provide hitless switching and jitter attenuation

with programmable loop bandwidth (LBW) and one

external loop filter capacitor, maximizing flexibility and

ease of use.

APLL3 features an ultra-high performance PLL with

TI's proprietary Bulk Acoustic Wave (BAW) technology

in the VCO and can generate 312.5MHz output

clocks with 42fs typical RMS jitter (12kHz to 20MHz)

irrespective of the DPLL reference input frequency

and jitter characteristics. APLL2 and APLL1 feature

conventional LC VCOs to provide options for a

second or third frequency and/or synchronization

domain.

Reference validation circuitry monitors the DPLL

reference inputs and automatically performs a hitless

switch when the inputs are detected or lost. Zero-

Delay Mode (ZDM) provides control over the phase

relationship between inputs and outputs.

The device is fully programmable through I2C or SPI.

The integrated EEPROM can be used to customize

system start-up clocks. The device also features

factory default ROM profiles as fallback options.