LMK05028RGCT.B中文资料德州仪器数据手册PDF规格书

1 Features

• Two Independent PLL Channels Featuring:

– Jitter: 150fs RMS for Outputs ≥ 100MHz

– Phase Noise: –112dBc/Hz at 100Hz Offset for

122.88MHz

– Hitless Switching: 50ps Phase Transient With

Phase Cancellation

– Programmable Loop Bandwidth With Fastlock

– Standards-Compliant Synchronization and

Holdover Using a Low-Cost TCXO/OCXO

– Any Input to Any Output Frequency Translation

• Four Reference Clock Inputs

– Priority-Based Input Selection

– Digital Holdover on Loss of Reference

• Eight Clock Outputs With Programmable Drivers

– Up to Six Different Output Frequencies

– AC-LVDS, AC-CML, AC-LVPECL, HCSL, and

1.8V or 2.5V LVCMOS Output Formats

• EEPROM/ROM for Custom Clocks on Power-Up

• Flexible Configuration Options

– Up to 750MHz on Input and Output

– XO: 10MHz to 100MHz, TCXO: 10MHz to

54MHz

– DCO Mode: < 1ppt/Step for Fine Frequency

and Phase Steering (IEEE 1588 Slave)

– Zero Delay for Deterministic Phase Offset

– Robust Clock Monitoring and Status

– I2C or SPI Interface

• Excellent Power Supply Noise Rejection (PSNR)

• 3.3V Supply With 1.8V, 2.5V, or 3.3V Outputs

• Industrial Temperature Range: –40°C to +85°C

2 Applications

• SyncE (G.8262), SONET/SDH (Stratum 3/3E,

G.813, GR-1244, GR-253), IEEE 1588 PTP Slave

Clock, or Optical Transport Network (G.709)

• Wired networking

– Inter/Intra DC interconnect

– Timing card, line card

• Data center and enterprise computing

• Broadband fixed line access

• Industrial

– Test and measurement

– Medical imaging

• Jitter and Wander Attenuation, Precise Frequency

Translation, and Low-Jitter Clock Generation for

FPGA, DSP, ASIC, and CPU Devices

3 Description

The LMK05028 is a high-performance network

synchronizer clock device that provides jitter cleaning,

clock generation, advanced clock monitoring, and

good hitless switching performance to meet the

stringent timing requirements of communications

infrastructure and industrial applications. The low jitter

and high PSNR of the device reduce bit error rates

(BER) in high-speed serial links.

The device has two PLL channels and generates up

to eight output clocks with 150-fs RMS jitter. Each PLL

domain can select from any four reference inputs to

synchronize the outputs.