LM5165XQDRCTQ1集成电路（IC）的稳压器-DC-DC开关稳压器规格书PDF中文资料

LM5165XQDRCTQ1属于集成电路（IC）的稳压器-DC-DC开关稳压器。由德州仪器制造生产的LM5165XQDRCTQ1稳压器 - DC-DC 开关稳压器DC-DC 开关稳压器 PMIC（电源管理集成电路）产品族中的产品是元器件级设备，用于需要稳定 DC 输入电压和/或将其转换为不同幅度的输出电压的应用。这些器件与称为“控制器”PMIC 的类似产品的区别在于集成了主开关元件，设备提供的电力会通过该元件。

1 Features

• AEC-Q100 qualified for automotive applications

– Device temperature grade 1: –40°C to 125°C

ambient temperature range

– Device HBM ESD classification level 2

– Device CDM ESD classification level C5

• Wide input voltage range of 3 V to 65 V

• 10.5-μA no-load quiescent current

• –40°C to 150°C junction temperature range

• Fixed (3.3 V and 5 V) or adjustable output voltages

• Meets EN55022 / CISPR 22 EMI standards

• Integrated 2-Ω PMOS buck switch

– Supports 100 duty cycle for low dropout

• Integrated 1-Ω NMOS synchronous rectifier

– Eliminates external rectifier diode

• Programmable current limit setpoint (four levels)

• Selectable PFM or COT mode operation

• 1.223-V ±1 internal voltage reference

• 900-μs internal or programmable soft start

• Active slew rate control for low EMI

• Monotonic start-up into prebiased output

• No loop compensation or bootstrap components

• Precision enable and input UVLO with hysteresis

• Thermal shutdown protection with hysteresis

• 10-pin VSON and VSSOP packages

• Use TPSM265R1 module for faster time to market

• Create a custom regulator design using

WEBENCH® Power Designer

2 Applications

• Automotive and battery-powered equipment

• High-voltage LDO replacement

• General-purpose bias supplies

3 Description

The LM5165-Q1 device is a compact, easy-to-use,

3-V to 65-V, ultra-low IQ synchronous buck converter

with high efficiency over wide input voltage and load

current ranges. With integrated high-side and low-side

power MOSFETs, up to 150-mA of output current

can be delivered at fixed output voltages of 3.3 V

or 5 V or at an adjustable output. The converter is

designed to simplify implementation while providing

options to optimize the performance for the target

application. Pulse Frequency Modulation (PFM) mode

is selected for optimal light-load efficiency or Constant

On-Time (COT) control for nearly constant operating

frequency. Both control schemes do not require loop

compensation while providing excellent line and load

transient response and short PWM on-time for large

step-down conversion ratios.

The high-side P-channel MOSFET can operate at

100 duty cycle for lowest dropout voltage and does

not require a bootstrap capacitor for gate drive. Also,

the current limit setpoint is adjustable to optimize

inductor selection for a particular output current

requirement. Selectable and adjustable start-up timing

options include minimum delay (no soft start),

internally fixed (900 μs), and externally programmable

soft start using a capacitor. An open-drain PGOOD

indicator can be used for sequencing, fault reporting,

and output voltage monitoring. The LM5165-Q1 is

qualified to automotive AEC-Q100 grade 1 and is

available in 10-pin VSON and VSSOP packages with

0.5-mm pin pitch.