JM38510集成电路（IC）的数模转换器（DAC）规格书PDF中文资料

JM38510属于集成电路（IC）的数模转换器（DAC）。由亚德诺半导体技术有限公司制造生产的JM38510数模转换器（DAC）数模转换器（DAC、D/A、D2A 或 D 转 A）可将数字信号转换为缓冲或无缓冲的模拟电压或电流。DAC 架构是否适合特定应用，要取决于分辨率和采样频率。DAC 通常用于音乐播放器，将数字数据流转换为模拟音频流。它们还用于电视和手机，将数字视频数据转换为模拟视频信号，再连接到屏幕驱动器，以显示单色或彩色图像。

PRODUCT DESCRIPTION

The AD534 is a monolithic laser trimmed four-quadrant multiplier divider having accuracy specifications previously found only in expensive hybrid or modular products. A maximum

multiplication error of ±0.25 is guaranteed for the AD534L without any external trimming. Excellent supply rejection, low temperature coefficients and long term stability of the on-chip

thin film resistors and buried Zener reference preserve accuracy even under adverse conditions of use. It is the first multiplier to offer fully differential, high impedance operation on all inputs,

including the Z-input, a feature which greatly increases its flexibility and ease of use. The scale factor is pretrimmed to the standard value of 10.00 V; by means of an external resistor, this

can be reduced to values as low as 3 V.

FEATURES

Pretrimmed to 60.25 max 4-Quadrant Error (AD534L)

All Inputs (X, Y and Z) Differential, High Impedance for [(X1– X2) (Y1– Y2)/10 V] + Z2 Transfer Function

Scale-Factor Adjustable to Provide up to X100 Gain

Low Noise Design: 90mV rms, 10 Hz–10 kHz

Low Cost, Monolithic Construction

Excellent Long Term Stability

APPLICATIONS

High Quality Analog Signal Processing

Differential Ratio and Percentage Computations

Algebraic and Trigonometric Function Synthesis

Wideband, High-Crest rms-to-dc Conversion

Accurate Voltage Controlled Oscillators and Filters

Available in Chip Form