INA381A4IDSGT集成电路（IC）的电流调节/管理规格书PDF中文资料

INA381A4IDSGT属于集成电路（IC）的电流调节/管理。由德州仪器制造生产的INA381A4IDSGT电流调节/管理电流调节和管理 IC 是用于监视和调节电路电流的半导体器件。功能包括电流表、限流、电流镜、电流监控器、电流调节器、电流纹波抑制器、电流检测、电流源、电流开关和电子保险丝，电流输出从 100 μA 至 50 A 可调。

1 Features

1• Common-mode input range: –0.2 V to +26 V

• High accuracy amplifier:

– Offset voltage at TA = 25°C

– 500 μV (maximum) at VCM = 12 V

– 150 μV (maximum) at VCM = 0 V

– Offset voltage drift: 1 μV/°C (maximum)

– Gain error: 1% (maximum) at 25°C

– Gain error drift: 20 ppm/°C (maximum)

• Available amplifier gains:

– INA381A1: 20 V/V

– INA381A2: 50 V/V

– INA381A3: 100 V/V

– INA381A4: 200 V/V

• Open-drain comparator:

– Hysteresis: 50 mV

– Propagation delay: 400 ns (typ)

– Alert threshold set through external reference

voltage

– Supports transparent and latching modes

• Packages: VSSOP-10 and WSON-8

2 Applications

• Merchant network and server PSU

• Merchant DC/DC

• DC-input BLDC motor drive

• Cordless power tool

• Headsets, headphones and earbuds

3 Description

The INA381 includes both a 26-V common-mode,

current-sensing amplifier and a high-speed

comparator. This device detects overcurrent

conditions by measuring the voltage developed

across a current-shunt resistor and comparing that

voltage to a user-defined threshold limit set by the

comparator reference pin. The current-shunt monitor

can measure differential voltage signals on commonmode

voltages that vary from –0.2 V up to 26 V,

independent of the supply voltage.

The open-drain alert output can be configured to

operate in two modes: transparent or latched. In

transparent mode, the output status follows the input

state. In latched mode, the alert output is cleared only

when the latch is reset. The standalone comparator

large-signal alert response time is less than 2 μs,

allowing for quick detection of overcurrent events.

The total system overcurrent protection response

time provided by the INA381 is less than 10 μs.

This device operates from a single 2.7-V to 5.5-V

supply, drawing a maximum supply current of 350 μA.

The device is specified over an operating temperature

range of –40°C to +125°C, and is available in 8-pin

WSON and 10-pin VSSOP packages.