HT2ICS2002W

HITAG 2 transponder IC; Identification transponder for use in contactless applications\nOperating frequency 125 kHz\nData transmission and energy supply via RF link, no internal battery\nReading distance same as writing distance\nNon-volatile memory of 256 bits (128-bit user data and 128-bit control data/secret memory) organized in 8 pages, 4 bytes each\n10 years non-volatile data retention\n100000 erase/write cycles\nSelective read/write protection of memory content\nTwo coding schemes for read operation: Biphase and Manchester coding\nEffective communication protocol with outstanding data integrity check\nMutual authentication function\nRead/write mode allows: Plain data transmission (password mode)\nEncrypted data transmission (crypto mode)\nIn read/write mode multi-tag operation possible because of special HALT-function\nEmulation of standard industrial read-only transponders: public-mode A (MIRO and transponders from μEM (H400x))\npublic-mode B (according to ISO 11784 and ISO 11785 for animal identification)\npublic-mode C (PIT compatible mode)\nTarget ApplicationsLogistics\nLivestock tracking\nAsset tracking\nGas cylinder ID\nCasino - gambling\nIndustrial automation\n;

HITAG 2 based transponders are highly integrated and do not need any additional components beside the HITAG 2 transponder IC and the external coil. Data are transmitted bidirectionally, in half duplex mode, between Read Write Device (RWD) and HITAG transponder IC. To achieve a main stream security, data may be transmitted enciphered. HITAG 2 transponder IC offer a memory of 256 bit.\nCustom specific configuration of the transponder IC is possible by using the configuration page. The configuration page allows the selection of different modes and access possibilities and also the configuration of the memory. The pages of the memory can be protected against read or write access by setting corresponding memory flags.\nThe HITAG 2 transponder IC provides - besides password and crypto mode - the following three standard read only modes, that can be configured using the configuration byte:\npublic-mode A\npublic-mode B (animal identification, according to ISO 11784 and ISO 11785)\npublic-mode C (PIT compatible mode PCF793x)\n

HT2ICS2002W/V6F/RV

RFID应答器 HITAG 2 transponder IC;