Description

These diode-transistor opto coup lers use an insulating layer between a LED and an integrated photodetector to provide elec trical in su lation between input and out put. Separate connections for the photodiode bias and out put-transistor collector increase the speed up to a hun dred times that of a conven tional phototransistor coupler by reduc ing the base-collector capacitance.

Features

• 15 kV/µs minimum common mode transient immunity at VCM = 1500 V

• High speed: 1 Mb/s

• TTL compatible

• Available in 8-Pin DIP, SO-8, widebody packages

• Open collector output

• Guaranteed performance from temperature: 0°C to 70°C

• Safety approval

UL Recognized – 3750 Vrms for 1 minute (5000 Vrms for 1 minute for HCNW and Option 020 devices) per UL1577 CSA Approved

IEC/EN/DIN EN 60747-5-5 Approved

– VIORM = 630 V peak for HCPL-4503#060

– VIORM = 1414 V peak for HCNW devices

• Dual channel version available (4534/0534)

• MIL-PRF-38534 hermetic version available (55XX/65XX/4N55)

Applications

• High voltage insulation

• Video signal isolation

• Power transistor isolation in motor drives

• Line receivers

• Feedback element in switched mode power supplies

• High speed logic ground isolation

– TTL/TTL, TTL/CMOS, TTL/LSTTL

• Replaces pulse transformers

• Replaces slow phototransistor isolators

• Analog signal ground isolation