ESP32-C5NR4中文资料乐鑫科技数据手册PDF规格书

Features

Wi-Fi

• 1T1R in 2.4 and 5 GHz dual band

• Operating frequency: 2412 ~ 2484 MHz, 5180 ~ 5885 MHz

• IEEE 802.11ax-compliant

– 20 MHz-only non-AP mode

– Uplink and downlink OFDMA to enhance connectivity and performance in congested environments

for IoT applications

– Downlink MU-MIMO (multi-user, multiple input, multiple output) to increase network capacity

– Beamformee that improves signal quality

– Spatial reuse to maximize parallel transmissions

– Target wake time (TWT) that optimizes power saving mechanisms

• IEEE 802.11ac-compliant

– 20 MHz bandwidth

– Downlink fullband MU-MIMO

• Fully compatible with IEEE 802.11a/b/g/n protocol

– 20 MHz and 40 MHz bandwidth

– Data rate up to 150 Mbps

– Wi-Fi Multimedia (WMM)

– TX/RX A-MPDU, TX/RX A-MSDU

– Immediate Block ACK

– Fragmentation and defragmentation

– Transmission opportunity (TXOP)

– Automatic Beacon monitoring (hardware TSF)

– Four virtual Wi-Fi interfaces

– Simultaneous support for Infrastructure BSS in Station mode, SoftAP mode, Station + SoftAP mode,

and promiscuous mode

Note that when ESP32-C5 scans in Station mode, the SoftAP channel will change along with the

Station channel

– Antenna diversity

– 802.11mc FTM

Bluetooth®

• Bluetooth LE: Bluetooth Core 6.0 certified

• Bluetooth mesh 1.1

• High power mode (20 dBm)

• Direction finding (AoA/AoD)

• Periodic advertising with responses (PAwR)

• LE connection subrating

• LE power control

• Speed: 125 Kbps, 500 Kbps, 1 Mbps, 2 Mbps

• LE advertising extensions and multiple advertising sets

• Allow devices to operate in Broadcaster, Observer, Central, and Peripheral roles concurrently

IEEE 802.15.4

• Compliant with IEEE 802.15.4-2015 protocol

• OQPSK PHY in 2.4 GHz band

• Data rate: 250 Kbps

• Thread 1.4

• Zigbee 3.0

CPU and Memory

• High-performance (HP) RISC-V processor:

– Clock speed: up to 240 MHz

– Five-stage pipeline

– CoreMark® score: 820.19 CoreMark；3.42 CoreMark/MHz (O3)

• Low-power (LP) RISC-V processor:

– Clock speed: up to 40 or 48 MHz

– Two-stage pipeline

• ROM: 320 KB

• HP SRAM: 384 KB

• LP SRAM: 16 KB

• Flash/PSRAM controller with cache is supported

• Flash in-circuit programming (ICP) is supported

Advanced Peripheral Interfaces

• 29 GPIOs

• Analog interfaces:

– 12-bit SAR ADC, up to 6 channels

– Temperature sensor

– Brownout detector

– Analog voltage comparator