Rotary Decoder - 2 wire Interface

Description The ELM408 is an 8 pin integrated circuit that is used to convert the output from a rotary encoder into two signals (chip select, and up/down) that can be used to control various devices. The low power CMOS technology used ensures that only a very small current is required over the en

文件：63.11 Kbytes 页数：10 Pages

ELM

2 wire Interface

The ELM408 is an 8 pin integrated circuit that is used to convert the output from a rotary encoder into two signals (chip select, and up/down) that can be used to control various devices. The low power CMOS technology used ensures that only a very small current is required over the entire 2.0 to 5.5 ·Low power CMOS design\n·Wide supply range – 2.0 to 5.5 volts\n·Complete debouncing of the encoder inputs\n·No external filtering needed\n·2x and 4x decoding\n·Can generate a write sequence\n·Startup delay timer\n·High current drive outputs;

ELM

Rotary Decoder - 2 wire Interface

Description The ELM408 is an 8 pin integrated circuit that is used to convert the output from a rotary encoder into two signals (chip select, and up/down) that can be used to control various devices. The low power CMOS technology used ensures that only a very small current is required over the en

文件：63.11 Kbytes 页数：10 Pages

ELM

Rotary Decoder - 2 wire Interface

Description The ELM408 is an 8 pin integrated circuit that is used to convert the output from a rotary encoder into two signals (chip select, and up/down) that can be used to control various devices. The low power CMOS technology used ensures that only a very small current is required over the en

文件：63.11 Kbytes 页数：10 Pages

ELM