Rotary Decoder - 3 wire 4x Interface

Description The ELM407 is an 8 pin integrated circuit that is used to convert the output from a rotary encoder into three signals (chip select, clock and up/down) that can be used to control various devices. The low power CMOS technology used ensures that only a very small current is required ove

文件：61.92 Kbytes 页数：10 Pages

ELM

3 wire 4x Interface

The ELM407 is an 8 pin integrated circuit that is used to convert the output from a rotary encoder into three signals (chip select, clock and up/down) that can be used to control various devices. The low power CMOS technology used ensures that only a very small current is required over the entire 2. ·Low power CMOS design\n·Wide supply range – 2.0 to 5.5 volts\n·Complete debouncing of the encoder inputs\n·No external filtering needed\n·4x decoding\n·Can generate a write sequence\n·Startup delay timer\n·High current drive outputs;

ELM

Rotary Decoder - 3 wire 4x Interface

Description The ELM407 is an 8 pin integrated circuit that is used to convert the output from a rotary encoder into three signals (chip select, clock and up/down) that can be used to control various devices. The low power CMOS technology used ensures that only a very small current is required ove

文件：61.92 Kbytes 页数：10 Pages

ELM

Rotary Decoder - 3 wire 4x Interface

Description The ELM407 is an 8 pin integrated circuit that is used to convert the output from a rotary encoder into three signals (chip select, clock and up/down) that can be used to control various devices. The low power CMOS technology used ensures that only a very small current is required ove

文件：61.92 Kbytes 页数：10 Pages

ELM