Rotary Encoder Debounce Circuit

Description The ELM401 is an 8 pin integrated circuit that is used to ‘debounce’ the signals from a mechanical rotary (quadrature) encoder. The low power CMOS technology used ensures that only a very small current is required over the entire 2.0 to 5.5 volt operating range. There is no need

文件：51.9 Kbytes 页数：8 Pages

ELM

Debounce Circuit

The ELM401 is an 8 pin integrated circuit that is used to ‘debounce’ the signals from a mechanical rotary (quadrature) encoder. The low power CMOS technology used ensures that only a very small current is required over the entire 2.0 to 5.5 volt operating range.\n\n There is no need for external ·Low power CMOS design\n·Wide supply range – 2.0 to 5.5 volts\n·Complete debouncing of the encoder signals\n·No external filtering needed\n·Includes switch debouncing circuit\n·Startup delay timer\n·High current drive outputs;

ELM

Rotary Encoder Debounce Circuit

Description The ELM401 is an 8 pin integrated circuit that is used to ‘debounce’ the signals from a mechanical rotary (quadrature) encoder. The low power CMOS technology used ensures that only a very small current is required over the entire 2.0 to 5.5 volt operating range. There is no need

文件：51.9 Kbytes 页数：8 Pages

ELM

Rotary Encoder Debounce Circuit

Description The ELM401 is an 8 pin integrated circuit that is used to ‘debounce’ the signals from a mechanical rotary (quadrature) encoder. The low power CMOS technology used ensures that only a very small current is required over the entire 2.0 to 5.5 volt operating range. There is no need

文件：51.9 Kbytes 页数：8 Pages

ELM