dsPIC30F6015

16-Bit Digital Signal Controllers; High-Performance dsPIC30F core• Modified Harvard architecture\n• C compiler optimized instruction set architecture\n• 24-bit wide instructions, 16-bit wide data path\nUp to 30 MIPS operation\nDSP Engine for math intensive operations\n• Modulo and Bit-Reversed Addressing modes\n• Two, 40-bit wide accumulators with optional saturation logic\n• 17-bit x 17-bit single cycle hardware fractional/ integer multiplier\n• Single cycle Multiply-Accumulate (MAC) operation\n• 40-stage Barrel Shifter\n• Dual data fetch\nOperating ConditionsWide operating voltage range (2.5V to 5.5V)\n• Industrial and Extended temperature ranges\nPeripheral Features• High current sink/source I/O pins: 25 mA/25 mA\n• Optionally pair up 16-bit timers into 32-bit timer modules\n• 3-wire SPI™ modules (supports 4 Frame modes)\n• I2C™ module supports Multi-Master/Slave mode and 7-bit/10-bit addressing\n• Addressable UART modules with FIFO buffers\n1 CAN module, 2.0B compliant\nMotor Control PWM Module FeaturesMotor Control PWM Module with Complementary or Independent Output modes\n• Edge and Center Aligned modes\n• Multiple duty cycle generators\n• Dedicated time base with 4 modes\n• Programmable output polarity\n• Dead time control for Complementary mode\n• Manual output control\n• Trigger for synchronized A/D conversions\nQuadrature Encoder Interface Module FeaturesQEI with Phase A, Phase B and Index Pulse input\n• 16-bit up/down position counter\n• Count direction status\n• Position Measurement (x2 and x4) mode\n• Programmable digital noise filters on inputs\n• Alternate 16-bit Timer/Counter mode\n• Interrupt on position counter rollover/underflow\nAnalog Features• 10-bit 1 Msps Analog-to-Digital Converter (A/D)\n• A/D Conversion available during Sleep and Idle\n• 4 Sample/Hold Channels\n• Multiple Conversion Sequencing Options\nSpecial Microcontroller Features• Enhanced Flash program memory with 10,000 erase/write cycle (min.) for industrial temperature range, 100K (typical)\n• Data EEPROM memory with 100,000 erase/write cycle (min.) for industrial temperature range, 1M (typical)\n• Self-reprogrammable under software control\n• Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)\n• Flexible Watchdog Timer (WDT) with on-chip low power RC oscillator for reliable operation\n• Fail-Safe clock monitor operation\n• Detects clock failure and switches to on-chip low power RC oscillator\n• Programmable code protection\n• In-Circuit Serial Programming™ (ICSP™)\n• DC to 40 MHz external clock input\n• 4 MHz-10 MHz oscillator input with PLL active (4x, 8x, 16x)\n• Programmable Brown-out Detection and Reset generation\n• Sleep, Idle and Alternate Clock modes for power management;

dsPIC30F Motor Control 16-bit Digital Signal Controller.Seamless migration options from this device to dsPIC33F and PIC24 devices in similar packages.

DSPIC30F6015

High-Performance, 16-Bit Digital Signal Controllers

dsPIC30F6015

High-Performance, 16-bit Digital Signal Controllers

DSPIC30F6015

High-Performance, 16-Bit Digital Signal Controllers

DSPIC30F6015

High-Performance, 16-Bit Digital Signal Controllers

DSPIC30F6015

High-Performance, 16-Bit Digital Signal Controllers

DSPIC30F6015-30I

High-Performance, 16-Bit Digital Signal Controllers

DSPIC30F6015-30I-PT

High-Performance, 16-Bit Digital Signal Controllers

DSPIC30F6015AT-20I/PF

High-Performance, 16-Bit Digital Signal Controllers

DSPIC30F6015AT-20ISLASHPF

High-Performance, 16-Bit Digital Signal Controllers