DS83C530

EPROM微控制器，带有实时时钟; \n• 80C52 Compatible\n• 8051 Instruction-Set Compatible \n• Four 8-Bit I/O Ports \n• Three 16-Bit Timer/Counters \n• 256 Bytes Scratchpad RAM\n• Large On-Chip Memory\n• 16kB EPROM (OTP) \n• 1kB Extra On-Chip SRAM for MOVX\n• ROMSIZE Features\n• Selects Effective On-Chip ROM Size from 0 to 16kB \n• Allows Access to Entire External Memory Map \n• Dynamically Adjustable by Software \n• Useful as Boot Block for External Flash\n• Nonvolatile Functions\n• On-Chip Real-Time Clock with Alarm Interrupt \n• Battery Backup Support of 1kB SRAM\n• High-Speed Architecture\n• 4 Clocks/Machine Cycle (8051 = 12) \n• Runs DC to 33MHz Clock Rates \n• Single-Cycle Instruction in 121ns \n• Dual Data Pointer \n• Optional Variable Length MOVX to Access Fast/Slow RAM /Peripherals\n• Power Management Mode\n• Programmable Clock Source Saves Power \n• Runs from (crystal/64) or (crystal/1024) \n• Provides Automatic Hardware and Software Exit\n• EMI Reduction Mode Disables ALE \n• Two Full-Duplex Hardware Serial Ports \n• High Integration Controller Includes:\n• Power-Fail Reset \n• Early-Warning Power-Fail Interrupt \n• Programmable Watchdog Timer\n• 14 Total Interrupt Sources with Six External;

The DS87C530/DS83C530 EPROM/ROM microcontrollers with a real-time clock (RTC) are 8051-compatible microcontrollers based on the Dallas Semiconductor high-speed core. They use 4 clocks per instruction cycle instead of the 12 used by the standard 8051. They also provide a unique mix of peripherals not widely available on other processors. They include an on-chip RTC and battery backup support for an on-chip 1k x 8 SRAM. The new Power Management Mode allows software to select reduced power operation while still processing.\n A combination of high-performance microcontroller core, RTC, battery-backed SRAM, and power management makes the DS87C530/DS83C530 ideal for instruments and portable applications. They also provide several peripherals found on other Dallas high-speed microcontrollers. These include two independent serial ports, two data pointers, on-chip power monitor with brownout detection and a watchdog timer.\n Power Management Mode (PMM) allows software to select a slower CPU clock. While default operation uses four clocks per machine cycle, the PMM runs the processor at 64 or 1024 clocks per cycle. There is a corresponding drop in power consumption when the processor slows.\n The EMI reduction feature allows software to select a reduced emission mode. This disables the ALE signal when it is unneeded.\n The DS83C530 is a factory mask ROM version of the DS87C530 designed for high-volume, costsensitive applications. It is identical in all respects to the DS87C530, except that the 16kB of EPROM is replaced by a user-supplied application program. All references to features of the DS87C530 will apply to the DS83C530, with the exception of EPROM-specific features where noted. Please contact your local Dallas Semiconductor sales representative for ordering information.\n Note: The DS87C530/DS83C530 are monolithic devices. A user must supply an external battery or super cap and a 32.768kHz timekeeping crystal to have permanently powered timekeeping or nonvolatile RAM. The DS87C530/DS83C530 provide all the support and switching circuitry needed to manage these resources.

DS83C530

EPROM/ROM Microcontrollers with Real-Time Clock

DS83C530

EPROM/ROM Micro with Real Time Clock

DS83C530

EPROM/ROM Microcontrollers with Real-Time Clock

DS83C530-DS87C530

EPROM/ROM Microcontrollers with Real-Time Clock

DS83C530-ECL

EPROM/ROM Microcontrollers with Real-Time Clock

DS83C530-ECL

EPROM/ROM Microcontrollers with Real-Time Clock

DS83C530-ECL

EPROM/ROM Micro with Real Time Clock

DS83C530-ECL

EPROM/ROM Microcontrollers with Real-Time Clock

DS83C530-ECL+

EPROM/ROM Microcontrollers with Real-Time Clock