DS21S07A数据手册集成电路（IC）的信号端接器规格书PDF

描述 Description

The DS21S07A is backward-compatible replacement for the DS2107A providing precision resistance values for SCSI-1, Fast, and Ultra SCSI with 2% tolerance.
Each chip actively terminates cable segments in SCSI systems carrying nine single-ended drivers and receivers. In an 8-bit wide SCSI arrangement, two DS21S07As connected at each end of the SCSI cable can terminate 18 active signal lines. A 16-bit wide SCSI arrangement requires three DS21S07As at each end to terminate 27 active signal lines.
SCSI termination is used wherever data must be transmitted without voltage drops caused by signal reflection at the parallel bus termination point, which is often significant in multidropped systems.
All Dallas terminators feature power-down mode with extremely low-quiescent consumption. Different SCSI terminators are available to match every existing SCSI protocol and to address different design concerns, such as price, board space, and voltage differential.

特性 Features

• Fully compliant with SCSI-1, Fast, and Ultra SCSI standards
• Backward-compatible with DS2107 and DS2107A
• Provides active signal termination for 9 lines
• Handles actively negated SCSI signals
• Laser-trimmed 110-ohm resistors with 2% tolerance
• Low drop-out voltage of 3pF
• Power-down mode with resistors isolated from bus
• SCSI bus hot plug-compatible
• Onboard thermal shutdown circuitry
• Operating range:
• 0°C to +70°C
• 4.0V to 5.5V

简介

DS21S07A属于集成电路（IC）的信号端接器。由制造生产的DS21S07A信号端接器信号端接器用于向信号路径提供电气端点，以防止信号反射回电路而引起干扰。类型有电缆、DDCA、SCSI、HVD、SE、LVD、串行和 USB，端接数量为 1、2、6、8、9、14、15、18 或 27。