3.3 and 5.0 Volt MicroMonitor?

DESCRIPTION The DS1707/DS1708 3.3 or 5.0 Volt MicroMonitor monitors three vital conditions for a microprocessor: power supply, voltage sense, and external override. A precision temperature–compensated reference and comparator circuit monitors the status of VCC at the device and at an upstream poi

文件：67.57 Kbytes 页数：9 Pages

Dallas

3.3 and 5.0-Volt MicroMonitor

文件：182.63 Kbytes 页数：10 Pages

Maxim

美信

3.3V及5.0V MicroMonitor

DS1707/DS1708 3.3或5.0伏MicroMonitor可监控微处理器的三个重要条件：电源、电压检测和外部覆盖。精密的温度补偿基准电压源和比较器电路监控器件和上游点的VCC状态，以实现充分的保护。当检测输入检测到超出容差的条件时，会生成不可屏蔽中断。当器件电压降低时，会生成内部电源故障信号，强制复位为有效状态。当VCC返回到容差范围内的条件时，复位信号将保持有效状态至少130ms，以便电源和处理器稳定下来。 • 在电源瞬变期间对微处理器进行限制\n\n• 发生电源故障后自动重启微处理器\n\n• 监控按钮的外部覆盖情况\n\n• 3.3V系统的复位精度为5%、10%或20%，5.0V系统的复位精度为5%或10%\n\n• 无需分立元件\n\n• 20%容差与3.0V系统兼容\n\n• 与MAXIM MAX707/MAX708 8引脚DIP、8引脚SO封装引脚兼容\n\n• 采用8引脚DIP、8引脚SO和8引脚µSOP封装\n\n• 工业温度范围：−40°C至+85°C;

ADI

亚德诺

3.3 and 5.0-Volt MicroMonitor

DESCRIPTION The DS1707/DS1708 3.3- or 5.0-Volt MicroMonitor monitors three vital conditions for a microprocessor: power supply, voltage sense, and external override. A precision temperature-compensated reference and comparator circuit monitor the status of VCC at the device and at an upstream poi

文件：182.62 Kbytes 页数：10 Pages

Maxim

美信

3.3 and 5.0-Volt MicroMonitor

DESCRIPTION The DS1707/DS1708 3.3- or 5.0-Volt MicroMonitor monitors three vital conditions for a microprocessor: power supply, voltage sense, and external override. A precision temperature-compensated reference and comparator circuit monitor the status of VCC at the device and at an upstream poi

文件：182.62 Kbytes 页数：10 Pages

Maxim

美信

3.3 and 5.0-Volt MicroMonitor

DESCRIPTION The DS1707/DS1708 3.3- or 5.0-Volt MicroMonitor monitors three vital conditions for a microprocessor: power supply, voltage sense, and external override. A precision temperature-compensated reference and comparator circuit monitor the status of VCC at the device and at an upstream poi

文件：182.62 Kbytes 页数：10 Pages

Maxim

美信

3.3 and 5.0 Volt MicroMonitor?

DESCRIPTION The DS1707/DS1708 3.3 or 5.0 Volt MicroMonitor monitors three vital conditions for a microprocessor: power supply, voltage sense, and external override. A precision temperature–compensated reference and comparator circuit monitors the status of VCC at the device and at an upstream poi

文件：67.57 Kbytes 页数：9 Pages

Dallas

3.3 and 5.0-Volt MicroMonitor

DESCRIPTION The DS1707/DS1708 3.3- or 5.0-Volt MicroMonitor monitors three vital conditions for a microprocessor: power supply, voltage sense, and external override. A precision temperature-compensated reference and comparator circuit monitor the status of VCC at the device and at an upstream poi

文件：182.62 Kbytes 页数：10 Pages

Maxim

美信

3.3 and 5.0-Volt MicroMonitor

DESCRIPTION The DS1707/DS1708 3.3- or 5.0-Volt MicroMonitor monitors three vital conditions for a microprocessor: power supply, voltage sense, and external override. A precision temperature-compensated reference and comparator circuit monitor the status of VCC at the device and at an upstream poi

文件：182.62 Kbytes 页数：10 Pages

Maxim

美信

3.3 and 5.0-Volt MicroMonitor

DESCRIPTION The DS1707/DS1708 3.3- or 5.0-Volt MicroMonitor monitors three vital conditions for a microprocessor: power supply, voltage sense, and external override. A precision temperature-compensated reference and comparator circuit monitor the status of VCC at the device and at an upstream poi

文件：182.62 Kbytes 页数：10 Pages

Maxim

美信