DRV8214 2-A Brushed DC Motor Driver with Ripple Counting, Stall Detection, and Speed Regulation

1 Features • N-channel H-bridge brushed DC motor driver • 1.65-V to 11-V operating supply voltage range • Ripple counting feature for: – On-chip Speed and Position detection – Integrated Voltage and Speed regulation • Soft-Start and Stop feature for inrush current protection • 240-mΩ RDS(o

文件：3.06556 Mbytes 页数：91 Pages

TI

德州仪器

DRV8215 11V 4A Brushed DC Motor Driver with Integrated Speed Regulation and Stall Detection

1 Features • N-channel H-bridge brushed DC motor driver • 1.65-V to 11-V operating supply voltage range • Integrated Voltage and Speed regulation • Soft-Start and Stop feature for inrush current protection • 240-mΩ RDS(on) (High-Side + Low-Side) • High output current capability: 4-A Peak, 2

文件：2.70623 Mbytes 页数：89 Pages

TI

德州仪器

DRV8235 38V 3.7A Brushed DC Motor Driver with Integrated Speed Regulation and Stall Detection

1 Features • N-channel H-bridge brushed DC motor driver • 4.5V to 38V operating supply voltage range • Integrated Voltage and Speed regulation • Soft-Start and Stop feature for inrush current protection • 600mΩ RDS(on) (High-Side + Low-Side) • High output current capability: 3.7A Peak, 2A R

文件：2.72699 Mbytes 页数：87 Pages

TI

德州仪器

具有无传感器失速检测、纹波计数和 I²C 接口的 11V、4A H 桥电机驱动器

The DRV8214 is a high-performance integrated H-bridge motor driver with integrated speed and position detection using ripple counting along with additional features like motor speed and voltage regulation, stall detection, current sense output, current regulation, and protection circuitry. \n\nThe i • N-channel H-bridge brushed DC motor driver\n• 1.65-V to 11-V operating supply voltage range\n• Ripple counting feature for: \n• On-chip Speed and Position detection\n• Integrated Voltage and Speed regulation\n \n• Soft-Start and Stop feature for inrush current protection\n• 240-mΩ R DS(on) (High-S;

TI

德州仪器

DRV8421 18V 2A Dual H-Bridge Stepper Driver

1 Features • Dual H-Bridge Motor Driver – Single/Dual Brushed DC – Stepper – Solenoids • 4 to 18V Operating Supply Voltage Range • Low ON-resistance: HS + LS = 900mΩ (Typical, 25°C) • High Output Current per H-Bridge – 2A Maximum Driver Current at 12V and TA = 25°C – Parallel Mode Avail

文件：873 Kbytes 页数：26 Pages

TI

德州仪器

DRV8421 18V 2A Dual H-Bridge Stepper Driver

1 Features • Dual H-Bridge Motor Driver – Single/Dual Brushed DC – Stepper – Solenoids • 4 to 18V Operating Supply Voltage Range • Low ON-resistance: HS + LS = 900mΩ (Typical, 25°C) • High Output Current per H-Bridge – 2A Maximum Driver Current at 12V and TA = 25°C – Parallel Mode Avail

文件：869.4 Kbytes 页数：25 Pages

TI

德州仪器

丝印：8214；Package：WQFN；DRV8214 2-A Brushed DC Motor Driver with Ripple Counting, Stall Detection, and Speed Regulation

1 Features • N-channel H-bridge brushed DC motor driver • 1.65-V to 11-V operating supply voltage range • Ripple counting feature for: – On-chip Speed and Position detection – Integrated Voltage and Speed regulation • Soft-Start and Stop feature for inrush current protection • 240-mΩ RDS(o

文件：3.06556 Mbytes 页数：91 Pages

TI

德州仪器