DP83TC813RRHFRQ1集成电路（IC）的驱动器接收器收发器规格书PDF中文资料

DP83TC813RRHFRQ1属于集成电路（IC）的驱动器接收器收发器。由德州仪器制造生产的DP83TC813RRHFRQ1驱动器，接收器，收发器该系列产品的主要功能是提供必需的硬件资源，以通过延长电缆或印制线进行通信。确切的功能会因所采用的通信协议而异，可能包括诸如瞬态抑制之类的功能，这些功能对于通信用途可能并非绝对必要，但对于可能的使用环境却是明智之选。

1 Features

• Open Alliance and IEEE 802.3bw 100BASE-T1

compliant

– Passes Level IV emissions with Integrated LPF

– TC-10 compliant with < 20μA sleep current

• Small Form Factor: 28pin VQFN (5mm x 4mm)

• SAE J2962-3 EMC compliant

• Configurable I/O voltages: 3.3 V, 2.5 V, and 1.8 V

• MAC interfaces: MII, RMII, RGMII and SGMII

• Optional separate voltage rail for MAC interface

pins (3.3 V, 2.5 V, 1.8 V)

• AEC-Q100 qualified for automotive applications:

– Temperature grade 1: –40°C to +125 °C

ambient operating temperature

– ±8-kV HBM ESD for pins 19 and 20

– IEC61000-4-2 ESD classification level 4 for

pins 19 and 20: ±8-kV contact discharge

• IEEE 1588 SFD support

• TSN compliant with 802.3br frame pre-emption

support

• Low active power operation: < 230 mW

• Diagnostic tool kit

– Signal quality indication (SQI)

– Time domain reflectometry (TDR)

– Electrostatic discharge sensor

– Voltage sensor

– PRBS Built-in Self-Test

– Loopbacks

• VQFN, wettable flank packaging

2 Applications

• ADAS

• Gateway and Body Control

• Telematics

3 Description

The DP83TC813-Q1 device is an IEEE 802.3bwcompliant

automotive PHYTER™ Ethernet physical

layer transceiver which can work with Unshielded

Twisted Pair cable. The PHY supports TC10 sleep

and wake features. It provides all physical layer

functions needed to transmit and receive data over

unshielded single twisted-pair cables. The device

provides xMII flexibility with support for standard MII,

RMII, RGMII, and SGMII MAC interfaces.The PHY

also integrates a low pass filter on the MDI side to

reduce emissions.

This device includes the Diagnostic Tool Kit, providing

an extensive list of real-time monitoring tools, debug

tools and test modes. Within the tool kit is the first

integrated electrostatic discharge (ESD) monitoring

tool. It is capable of counting ESD events on MDI

as well as providing real-time monitoring through the

use of a programmable interrupt. Additionally, the

DP83TC813-Q1 includes a pseudo random binary

sequence (PRBS) frame generation tool, which is fully

compatible with internal loopbacks, to transmit and

receive data without the use of a MAC. The device

is housed in a 5.00mm × 4.00mm, 28-pin VQFN

wettable flank package.