CXD2586R/-1中文资料CD Digital Signal Processor with Built-in Digital Servo and DAC数据手册Sony规格书

描述 Description

The CXD2586R/-1 is a digital signal processor LSI for CD players. This LSI incorporates the digital servo, digital filter and 1-bit DAC.

特性 Features

• All digital signal processing during playback is performed with a single chip
• Highly integrated mounting possible due to a built-in RAMDigital Signal Processor Block
• Playback mode which supports CAV (Constant
   Angular Velocity)
  
• Frame jitter free
  
• Half-speed to octuple-speed continuous playback
      possible with a low external clock (only CXD2586R-1
      supports up to octuple speed)
  
• Allows relative rotational velocity readout
• Wide capture range playback mode
  
• Spindle rotational velocity following method
  
• Supports normal-speed, double-speed, quadruple
      speed, sextuple-speed and octuple-speed playback
      (only CXD2586R-1)
• Wide frame jitter margin (±28 frames) due to a
   built-in 32K RAM
• The bit clock, which strobes the EFM signal, is
   generated by the digital PLL
• EFM data demodulation
• Enhanced EFM frame sync signal protection
• Refined super strategy-based powerful error correction
   C1: double correction, C2: quadruple correction
• Octuple-speed (only CXD2586R-1), sextuple-speed,
   quadruple-speed and double-speed playback (digital
   signal processor and digital servo blocks)
• Noise reduction during track jumps
• Auto zero-cross mute
• Subcode demodulation and Sub Q data error detection
• Digital spindle servo (with oversampling filter)
• 16-bit traverse counter
• Asymmetry compensation circuit
• CPU interface on serial bus
• Error correction monitor signal, etc. output from a
   new CPU interface
• Servo auto sequencer
• Fine search performs track jumps with high accuracy
• Digital audio interface outputs
• Digital level meter, peak meter
• Bilingual compatibleDigital Servo Block
• Microcomputer software-based flexible servo control
• Servo error signal, offset cancel function
• Servo loop, auto gain control function
• E:F balance, focus bias adjustment functionDigital Filters (DAC and LPF blocks)
• Low-pass filter for DAC
• Digital de-emphasis
• Digital attenuation
• 4fs oversampling filter
• Adopts secondary ∆∑ noise shaper
• LPF for DAC analog output