For contactless SW, object detection

Photo Interrupters For contactless SW, object detection Overview CNZ1102 and CNZ1108 are a photocoupler in which a high efficiency GaAs infrared light emitting diode is used as the light emitting element, and a high sensitivity phototransistor is used as the light detecting element. The

文件：70.78 Kbytes 页数：4 Pages

Panasonic

松下

Photo Interrupters

Photo Interrupters For contactless SW, object detection Overview CNZ1102 and CNZ1108 are a photocoupler in which a high efficiency GaAs infrared light emitting diode is used as the light emitting element, and a high sensitivity phototransistor is used as the light detecting element. The

文件：55.15 Kbytes 页数：3 Pages

Panasonic

松下

Single Lamp Driver IC

Description This ASIC provides up to 350 mA of drive current for powering bulbs. The typical application for this part is for use in airbag systems using a type 194 bulb. On–chip diagnostics provide open circuit and short circuit detection in the output on mode. In addition, the output driver wil

文件：132.07 Kbytes 页数：4 Pages

CHERRY

Single Lamp Driver IC

This ASIC provides up to 350 mA of drive current for powering bulbs. The typical application for this part is for use in airbag systems using a type 194 bulb. On–chip diagnostics provide open circuit and short circuit detection in the output on mode. In addition, the output driver will turn on (si

文件：45.53 Kbytes 页数：4 Pages

ONSEMI

安森美半导体

Power Amplifier Module for JCDMA

Description The CXG1108K is the power amplifier module which operates at a single power supply. This IC is designed using the Sony’s original p-Gate HFET process. Features • Single power supply operation: VDD1 = VDD2 = 3.5V, VGG = 2.95V (@High mode), VGG = 2.7V (@Low mode) • Ultras

文件：69.44 Kbytes 页数：6 Pages

SonySony Corporation

索尼