CDCLVC1310RHBRG4.B中文资料德州仪器数据手册PDF规格书

1FEATURES

• High-Performance Crystal Buffer With Ultralow

Noise Floor of –169 dBc/Hz

• Additive Phase Noise/Jitter Performance Is

25 fsRMS (Typ.)

• Level Translation With 3.3-V or 2.5-V Core and

3.3-V, 2.5-V, 1.8-V, or 1.5-V Output Supply

• Device inputs consist of primary, secondary,

and crystal inputs, and manually selectable

(through pins) using the input MUX. The

primary and secondary inputs can accept

LVPECL, LVDS, HCSL, SSTL or LVCMOS

signals and crystal input.

– Crystal Frequencies Supported Are From

8 MHz to 50 MHz

– Differential and Single-Ended Input

Frequencies Supported Are up to 200 MHz

• 10 Single-Ended LVCMOS Outputs. The

outputs can operate at 1.5-V, 1.8-V, 2.5-V or

3.3-V Power-Supply Voltage.

– LVCMOS Outputs Operate up to 200 MHz

– Output Skew Is 30 ps (Typical)

– Total Propagation Delay Is 2 ns (Typical)

– Synchronous and Glitch-Free Output

Enable Is Available

• Offered in QFN-32 5-mm × 5-mm Package With

Industrial Temperature Range of –40°C to 85°C

• Can Overdrive Crystal Input With LVCMOS

Signal up to 50 MHz

APPLICATIONS

• Wireless and Wired Infrastructure

• Networking and Data Communications

• Medical Imaging

• Portable Test and Measurement

• High-End A/V

DESCRIPTION

The CDCLVC1310 is a highly versatile, low-jitter, low-

power clock fanout buffer which can distribute to ten

low-jitter LVCMOS clock outputs from one of three

inputs, whose primary and secondary inputs can

feature differential or single-ended signals and crystal

input. Such a buffer is good for use in a variety of

mobile and wired infrastructure, data communication, computing, low-power medical imaging, and portable

test and measurement applications. When the input is

an illegal level, the output is at a defined state. One

can set the core to 2.5 V or 3.3 V, and output to 1.5

V, 1.8 V, 2.5 V or 3.3 V. Pin programming easily

configures the CDCLVC1310. The overall additive jitter performance is 25 fsRMS (typical). The

CDCLVC1310 comes in a small 32-pin 5-mm × 5-mm

QFN package.