Low Power, 5V uP Reset Active LOW, Push-Pull Output

General Description The ASM1810 is a voltage supervisor with low-power, 5V µP active LOW Reset, Push-Pull output. Maximum supply current over temperature is a low 20µA. The ASM1810 generates an active LOW reset signal whenever the monitored supply is out of tolerance. A precision reference and

文件：235.06 Kbytes 页数：9 Pages

ALSC

Low Power, 5V uP Reset Active LOW, Push-Pull Output

General Description The ASM1810 is a voltage supervisor with low-power, 5V µP active LOW Reset, Push-Pull output. Maximum supply current over temperature is a low 20µA. The ASM1810 generates an active LOW reset signal whenever the monitored supply is out of tolerance. A precision reference and

文件：235.06 Kbytes 页数：9 Pages

ALSC

5V EconoReset with Push-Pull Output

DESCRIPTION The DS1810 EconoReset uses a precision temperature reference and comparator circuit to monitor the status of the power supply (VCC). When an out-of-tolerance condition is detected, an internal power-fail signal is generated which forces reset to the active state. When VCC returns to

文件：54.68 Kbytes 页数：5 Pages

Dallas

Microprocessor Reset Circuit

General Description The MIC1810 is an inexpensive microprocessor supervisory circuit that monitors power supplies in microprocessor based systems. The function of these devices is to assert a reset if the power supply drops below a designated reset threshold level. Several different reset thresh

文件：226.37 Kbytes 页数：6 Pages

Micrel

麦瑞半导体