AS29F010CW-90SLASHQ中文资料AUSTIN数据手册PDF规格书

GENERAL DESCRIPTION

The AS29F010 is a 1Mbit, 5.0 Volt-only FLASH memory organized as 131,072 bytes. The AS29F010 is offered in a 32-pin CDIP package. The byte-wide data appears on DQ0-DQ7. The device is designed to be programmed in-system with the standard system 5.0 Volt VCC supply. A 12.0 volt VPP is not required for program or erase operations. The device can also be programmed or erased in standard EPROM programmers.

FEATURES

• Single 5.0V ±10% power supply operation

• Low power consumption:

√ 12 mA typical active read current

√ 30 mA typical program/erase current

√ <1 µA typical standby current

• Flexible sector architecture

√ Eight 16Kbyte sectors

√ Any combination of sectors can be erased

√ Full chip erase

• Sector protection

√ Hardware-based feature that disables/reenables program and erase operations in any combination of sectors

√ Sector protection/unprotection can be implemented using standard PROM programming equipment

• Embedded Algorithms

√ Embedded Erase algorithm automatically pre-programs and erases the chip or any combination of designated sectors

√ Embedded Program algorithm automatically programs and verifies data at specified address

• Erase Suspend/Resume

√ Supports reading data from a sector not being erased

• Minimum 1,000,000 Program/Erase Cycles per sector guaranteed

• Compatible with JEDEC standards

√ Pinout and software compatible with single-powersupply FLASH

√ Superior inadvertent write protection

• Data Polling and Toggle Bits

√ Provides a software method of detecting program or erase cycle completion