AP2281

Single Slew Rate Controlled Load Switch; Wide input voltage range: 1.5V – 6VLow RDS(ON): 80mΩ typical @ 5VTurn-on slew rate control°CAP2281-1: 1ms turn-on rise timeAP2281-3: 100us turn-on rise time with internal dischargeVery low turn-on quiescent current: Fast load discharge optionTemperature range -40°C to 85°CSOT26 and DFN2018-6: Available in “Green” Molding Compound (No Br, Sb)Lead Free Finish/ RoHS Compliant;

The AP2281 slew rate control°C load switch is a single P-channel MOSFET power switch designed for high-side load-switching applications. The MOSFET has a typical RDS(ON) of 80mΩ at 5V, allowing increased load current handling capacity with a low forward voltage drop. The turn-on slew rate of the device is control°C internally. The AP2281 load switch is designed to operate from 1.5V to 6V, making it ideal for 1.8V, 2.5V, 3.3V, and 5V systems. The typical quiescent supply current is only 0.01uA.

AP2281

SINGLE SLEW RATE CONTROLLED LOAD SWITCH

AP2281

Single Slew Rate Controlled Load Switch

AP22811A

Single Channel Power Distribution Load Switch;

The AP22811 is a single channel current-limited integrated high-side power switch optimized for Universal Serial Bus (USB) and other hot-swap applications. The family of devices complies with USB standards and is available with both polarities of Enable input.\n\n The device has fast short-circuit response time for improved overall system robustness, and has an integrated output discharge function to ensure completely controlled discharging of the output voltage capacitor. They provide a complete protection solution for applications subject to heavy capacitive loads and the prospect of short circuit, and offer reverse current blocking, over-current, over-temperature and short-circuit protection, as well as controlled rise time and under-voltage lockout functionality. A 6ms deglitch capability on the open-drain Flag output prevents false over-current reporting and does not require any external components.\n\n

AP22811B

Single Channel Power Distribution Load Switch;

The AP22811 is a single channel current-limited integrated high-side power switch optimized for Universal Serial Bus (USB) and other hot-swap applications. The family of devices complies with USB standards and is available with both polarities of Enable input.\n\n The device has fast short-circuit response time for improved overall system robustness, and has an integrated output discharge function to ensure completely controlled discharging of the output voltage capacitor. They provide a complete protection solution for applications subject to heavy capacitive loads and the prospect of short circuit, and offer reverse current blocking, over-current, over-temperature and short-circuit protection, as well as controlled rise time and under-voltage lockout functionality. A 6ms deglitch capability on the open-drain Flag output prevents false over-current reporting and does not require any external components.\n\n

AP22814

SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH

Features InputVoltageRange:2.7Vto5.5V 50mΩOn-resistance Built-inSoft-startwith0.6msTypicalRiseTime FaultReport(FLG)withBlankingTime(6msTyp) ESDProtection:2kVHBM,200VMM ActiveLow(B)orActiveHigh(A)Enable Protection OverCurrentwithAutoRecover

AP22814AMB-13

SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH

Features InputVoltageRange:2.7Vto5.5V 50mΩOn-resistance Built-inSoft-startwith0.6msTypicalRiseTime FaultReport(FLG)withBlankingTime(6msTyp) ESDProtection:2kVHBM,200VMM ActiveLow(B)orActiveHigh(A)Enable Protection OverCurrentwithAutoRecover

AP22814AMB-7

SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH

Features InputVoltageRange:2.7Vto5.5V 50mΩOn-resistance Built-inSoft-startwith0.6msTypicalRiseTime FaultReport(FLG)withBlankingTime(6msTyp) ESDProtection:2kVHBM,200VMM ActiveLow(B)orActiveHigh(A)Enable Protection OverCurrentwithAutoRecover

AP22814ASN-13

SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH

Features InputVoltageRange:2.7Vto5.5V 50mΩOn-resistance Built-inSoft-startwith0.6msTypicalRiseTime FaultReport(FLG)withBlankingTime(6msTyp) ESDProtection:2kVHBM,200VMM ActiveLow(B)orActiveHigh(A)Enable Protection OverCurrentwithAutoRecover

AP22814ASN-7

SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH

Features InputVoltageRange:2.7Vto5.5V 50mΩOn-resistance Built-inSoft-startwith0.6msTypicalRiseTime FaultReport(FLG)withBlankingTime(6msTyp) ESDProtection:2kVHBM,200VMM ActiveLow(B)orActiveHigh(A)Enable Protection OverCurrentwithAutoRecover