ANX7100

Gate pulse slicer (gate pulse modulator) solution optimized; • Flicker compensator\r\n\r\n• Power-on sequence control\r\n\r\n• Operation from 10V to 36 supply voltage\r\n\r\n• Operation up to 200kHz switching frequency\r\n\r\n• 2 modes of Gate-On duration control\r\n\r\n• Thermal shutdown (optional)\r\n\r\n• SOP-8 package\r\n\r\n• RoHS compliant and 100% Lead(Pb)-Free/Green;

The ANX7100 is a gate pulse slicer (gate pulse modulator) solution optimized for thin-film transistor (TFT) liquid crystal displays (LCDs).\n\nThe gate pulse slicer is a flicker compensation circuit to reduce the coupling effect of gate lines; the gate-shaping timing is controlled by the timing-controller to modulate the Gate-On voltage, VGHM. It also can delay the Gate-On voltage during power-on to achieve a correct power-on sequence for gate driver ICs. Both the power-on delay time and the falling time of the Gate-On voltage are programmable by external capacitor and resistor. There are 2 mode of ANX7100 to control the Gate-On duration; one is depending on VFLK logic-high period from timing-controller, the other is depending on the charging time of external capacitance.\n\n     The ANX7100 is available in a SOP-8 green package.\n\n

APC-7100

CPUbasedFanlessIndustrialRobustPanelPCwith10.4TFTLCD

APS-7100

500/1000VAPROGRAMMABLEACPOWERSOURCE

APS-7100E

500/1000VAACPOWERSOURCE

AZ7100

ML(AZ7)LimitSwitch

B7100

THEBayfrontseriesfeaturesasturdyaluminumhousingforgreaterdurabilityandadiffusdlenstomaximizeoutputuniformity.

BCM7100

SINGLECHIPCABLESETTOPBOXSYSTEM

BGX7100

RFManual16thedition

Generaldescription 10WplasticLDMOSpowertransistorforbasestationapplicationsatfrequenciesfrom700MHzto2700MHz. Featuresandbenefits ■Highefficiency ■Excellentruggedness ■Designedforbroadbandoperation ■Excellentthermalstability ■Highpowergain ■IntegratedESDp

ETC

CLM7100

LED-PhotoconductorIsolators

CRO7100Z-LF

Voltage-ControlledOscillatorSurfaceMountModule