AMC1306E25集成电路（IC）的ADC/DAC-特殊用途规格书PDF中文资料

AMC1306E25属于集成电路（IC）的ADC/DAC-特殊用途。由德州仪器制造生产的AMC1306E25ADC/DAC - 特殊用途该产品族中的产品可用于模拟和数字表示的信息转换，适用于特定用例，或集成了通用数据转换器中不常见的其他功能。例如针对超声或汽车雷达应用集成了低噪声放大器和可变增益级的器件、注重音频和视频的产品、在段码式显示器上集成显示测量值功能的器件、集成输入输出电气隔离的器件等。

1 Features

1• Pin-compatible family optimized for shunt-resistorbased

current measurements:

– ±50-mV or ±250-mV input voltage ranges

– Manchester coded or uncoded bitstream

options

• Excellent DC performance:

– Offset error: ±50 μV or ±100 μV (max)

– Offset drift: 1 μV/°C (max)

– Gain error: ±0.2% (max)

– Gain drift: ±40 ppm/°C (max)

• Transient immunity: 100 kV/μs (typ)

• System-level diagnostic features

• Safety-related certifications:

– 7000-VPEAK reinforced isolation per DIN VDE V

0884-11: 2017-01

– 5000-VRMS isolation for 1 minute per UL1577

– CAN/CSA no. 5A-component acceptance

service notice and IEC 62368-1 end equipment

standard

• Fully specified over the extended industrial

temperature range: –40°C to +125°C

2 Applications

• Shunt-resistor-based current sensing and isolated

voltage measurements in:

– Industrial motor drives

– Photovoltaic inverters

– Uninterruptible power supplies

3 Description

The AMC1306 is a precision, delta-sigma (ΔΣ)

modulator with the output separated from the input

circuitry by a capacitive double isolation barrier that is

highly resistant to magnetic interference. This barrier

is certified to provide reinforced isolation of up to

7000 VPEAK according to the DIN VDE V 0884-11 and

UL1577 standards. Used in conjunction with isolated

power supplies, this isolated modulator separates

parts of the system that operate on different commonmode

voltage levels and protects lower-voltage parts

from damage.

The input of the AMC1306 is optimized for direct

connection to shunt resistors or other low voltagelevel

signal sources. The unique low input voltage

range of the ±50-mV device allows significant

reduction of the power dissipation through the shunt

and supports excellent ac and dc performance. The

output bitstream of the AMC1306 is Manchester

coded (AMC1306Ex) or uncoded (AMC1306Mx),

depending on the derivate. By using an integrated

digital filter (such as those in the TMS320F2807x or

TMS320F2837x microcontroller families) to decimate

the bitstream, the device can achieve 16 bits of

resolution with a dynamic range of 85 dB at a data

rate of 78 kSPS.

The bitstream output of the Manchester coded

AMC1306Ex versions support single-wire data and

clock transfer without having to consider the setup

and hold time requirements of the receiving device.