5 kV rms Signal Isolated High Speed CAN Transceiver with Bus Protection

Digital isolators with iCoupler® technology enable designers to implement isolation in designs without the cost, size, power, performance, and reliability constraints found with optocouplers. iCoupler digital isolators also meet the wide range of creepage/clearance requirements and are the industr

文件：360.79 Kbytes 页数：20 Pages

AD

亚德诺

5 kV rms Signal Isolated High Speed CAN Transceiver with Bus Protection

GENERAL DESCRIPTION The ADM3054 is a 5 kV rms signal isolated controller area network (CAN) physical layer transceiver. The ADM3054 complies with the ISO 11898 standard. The device employs Analog Devices, Inc., iCoupler® technology to combine a 3-channel isolator and a CAN transceiver into a si

文件：446.51 Kbytes 页数：20 Pages

AD

亚德诺

Digital Isolator Product Selection and Resource Guide

文件：738.14 Kbytes 页数：4 Pages

AD

亚德诺

5 kV rms信号隔离高速CAN收发器，集成总线保护

ADM3054是一款5 kV rms信号隔离控制器局域网（CAN）物理层收发器，符合ISO 11898标准。\n\n 该器件采用ADI公司的 iCoupler®技术，将三通道隔离器和CAN收发器集成于单封装中。器件逻辑端采用 VDD1 上的3.3 V或5 V单电源供电，总线端则采用 VDD2 上的5 V单电源供电。总线端(VDD2)失电状况可以通过集成的VDD2SENSE 信号检测。\n\n ADM3054在CAN协议控制器与物理层总线之间创建一个隔离接口，它能以最高1Mbps的数据速率工作。\n\n 该器件的总线引脚（CANH和CANL）集成有保护功能，防止短接 • 5 kV rms信号隔离式CAN收发器\n\n• 工作电压(VDD1)：5 V或3.3 V\n\n• 工作电压(VDD2)：5 V\n\n• VDD2SENSE 用于检测 VDD2是否失电\n\n• 符合ISO 11898标准\n\n• 数据速率可高达1 Mbps\n\n• CANH和CANL集成有短路保护功能，防止短接到24 V系统中的电源或地\n\n• 无电节点不干扰总线\n\n• 总线支持110个或更多节点\n\n• 热关断保护\n\n• 高共模瞬变抗扰度： >25 kV/μs\n\n• 安全和法规认证 \n• UL认证 \n• 1分钟5000 V rms，符合UL 1577\n \;

ADI

亚德诺

5 kV rms Signal Isolated High Speed CAN Transceiver with Bus Protection

GENERAL DESCRIPTION The ADM3054 is a 5 kV rms signal isolated controller area network (CAN) physical layer transceiver. The ADM3054 complies with the ISO 11898 standard. The device employs Analog Devices, Inc., iCoupler® technology to combine a 3-channel isolator and a CAN transceiver into a si

文件：446.51 Kbytes 页数：20 Pages

AD

亚德诺

5 kV rms Signal Isolated High Speed CAN Transceiver with Bus Protection

Digital isolators with iCoupler® technology enable designers to implement isolation in designs without the cost, size, power, performance, and reliability constraints found with optocouplers. iCoupler digital isolators also meet the wide range of creepage/clearance requirements and are the industr

文件：360.79 Kbytes 页数：20 Pages

AD

亚德诺

5 kV rms Signal Isolated High Speed CAN Transceiver with Bus Protection

GENERAL DESCRIPTION The ADM3054 is a 5 kV rms signal isolated controller area network (CAN) physical layer transceiver. The ADM3054 complies with the ISO 11898 standard. The device employs Analog Devices, Inc., iCoupler® technology to combine a 3-channel isolator and a CAN transceiver into a si

文件：446.51 Kbytes 页数：20 Pages

AD

亚德诺

5 kV rms Signal Isolated High Speed CAN Transceiver with Bus Protection

GENERAL DESCRIPTION The ADM3054 is a 5 kV rms signal isolated controller area network (CAN) physical layer transceiver. The ADM3054 complies with the ISO 11898 standard. The device employs Analog Devices, Inc., iCoupler® technology to combine a 3-channel isolator and a CAN transceiver into a si

文件：446.51 Kbytes 页数：20 Pages

AD

亚德诺

5 kV rms Signal Isolated High Speed CAN Transceiver with Bus Protection

Digital isolators with iCoupler® technology enable designers to implement isolation in designs without the cost, size, power, performance, and reliability constraints found with optocouplers. iCoupler digital isolators also meet the wide range of creepage/clearance requirements and are the industr

文件：360.79 Kbytes 页数：20 Pages

AD

亚德诺

5 kV rms Signal Isolated High Speed CAN Transceiver with Bus Protection

GENERAL DESCRIPTION The ADM3054 is a 5 kV rms signal isolated controller area network (CAN) physical layer transceiver. The ADM3054 complies with the ISO 11898 standard. The device employs Analog Devices, Inc., iCoupler® technology to combine a 3-channel isolator and a CAN transceiver into a si

文件：446.51 Kbytes 页数：20 Pages

AD

亚德诺