100 MHz to 6 GHz TruPwr Detector

GENERAL DESCRIPTION The ADL5500 is a mean-responding power detector for use in high frequency receiver and transmitter signal chains from 100 MHz to 6 GHz. It is easy to apply, requiring only a single supply between 2.7 V and 5.5 V and a power supply decoupling capacitor. The input is internally

文件：1.66048 Mbytes 页数：24 Pages

AD

亚德诺

100 MHz to 6 GHz TruPwr Detector

FEATURES True rms response Excellent temperature stability ±0.1 dB accuracy vs. temperature over top 8 dB of input range Up to 30 dB input dynamic range at 3.9 GHz 50 Ω input impedance 1250 mV rms, +15 dBm, maximum input Single-supply operation: 2.7 V to 5.5 V Low power: 3 mW at 3 V supply

文件：1.67004 Mbytes 页数：24 Pages

AD

亚德诺

Tape and Reel Packaging

文件：395.36 Kbytes 页数：6 Pages

AD

亚德诺

100 MHz 至6 GHz TruPwr™检波器

ADL5500是一款均值响应功率检波器，适用于100 MHz至6 GHz的高频接收机和发射机信号链。 它易于使用，仅需2.7 V至5.5 V单电源和一个电源去耦电容便可工作。 输入为内部交流耦合，具有50 Ω的标称输入阻抗。 输出为线性响应直流电压，900 MHz时的转换增益为6.4 V/V均方根值。 输出端的片内1 kΩ串联电阻与外部分流电容配合使用，可建立低通滤波器响应，从而减少直流输出电压中的残留纹波。\n\n ADL5500主要用于简单和复合波形的真功率测量。 特别适合测量高波峰因素（高峰值-均方根比）信号，如基于CDMA2000、W-CDMA和QPSK/QAM的OFDM波形 • 真均方根响应 \n\n• 出色的温度稳定性\n\n• 整个温度范围的精度：±0.1 dB（输入范围超过8 dB） \n\n• 输入动态范围最高达30 dB (3.9 GHz) \n\n• 50 Ω输入阻抗 \n\n• 最大输入：1250 mV rms、+15 dBm \n\n• 单电源供电：2.7 V至5.5 V\n\n• 低功耗： 3 mW（3 V电源） \n\n• 符合RoHS标准;

ADI

亚德诺

100 MHz to 6 GHz TruPwr Detector

FEATURES True rms response Excellent temperature stability ±0.1 dB accuracy vs. temperature over top 8 dB of input range Up to 30 dB input dynamic range at 3.9 GHz 50 Ω input impedance 1250 mV rms, +15 dBm, maximum input Single-supply operation: 2.7 V to 5.5 V Low power: 3 mW at 3 V supply

文件：1.67004 Mbytes 页数：24 Pages

AD

亚德诺

100 MHz to 6 GHz TruPwr Detector

GENERAL DESCRIPTION The ADL5500 is a mean-responding power detector for use in high frequency receiver and transmitter signal chains from 100 MHz to 6 GHz. It is easy to apply, requiring only a single supply between 2.7 V and 5.5 V and a power supply decoupling capacitor. The input is internally

文件：1.66048 Mbytes 页数：24 Pages

AD

亚德诺

100 MHz to 6 GHz TruPwr Detector

GENERAL DESCRIPTION The ADL5500 is a mean-responding power detector for use in high frequency receiver and transmitter signal chains from 100 MHz to 6 GHz. It is easy to apply, requiring only a single supply between 2.7 V and 5.5 V and a power supply decoupling capacitor. The input is internally

文件：1.66048 Mbytes 页数：24 Pages

AD

亚德诺

丝印：Q06；Package：WLCSP；100 MHz to 6 GHz TruPwr Detector

FEATURES True rms response Excellent temperature stability ±0.1 dB accuracy vs. temperature over top 8 dB of input range Up to 30 dB input dynamic range at 3.9 GHz 50 Ω input impedance 1250 mV rms, +15 dBm, maximum input Single-supply operation: 2.7 V to 5.5 V Low power: 3 mW at 3 V supply

文件：1.67004 Mbytes 页数：24 Pages

AD

亚德诺

100 MHz to 6 GHz TruPwr Detector

GENERAL DESCRIPTION The ADL5500 is a mean-responding power detector for use in high frequency receiver and transmitter signal chains from 100 MHz to 6 GHz. It is easy to apply, requiring only a single supply between 2.7 V and 5.5 V and a power supply decoupling capacitor. The input is internally

文件：1.66048 Mbytes 页数：24 Pages

AD

亚德诺

100 MHz to 6 GHz TruPwr Detector

FEATURES True rms response Excellent temperature stability ±0.1 dB accuracy vs. temperature over top 8 dB of input range Up to 30 dB input dynamic range at 3.9 GHz 50 Ω input impedance 1250 mV rms, +15 dBm, maximum input Single-supply operation: 2.7 V to 5.5 V Low power: 3 mW at 3 V supply

文件：1.67004 Mbytes 页数：24 Pages

AD

亚德诺